CR125 Clutch waterpump cover

TAMBURELLO 7/14/2013 6:24pm
7/14/2013 6:24pm
I am almost finished but heres a peek

TAMBURELLO 7/15/2013 6:46pm
7/15/2013 6:46pm
TAMBURELLO wrote:
I am almost finished but heres a peek [img]http://s861.photobucket.com/user/cafehusky/media/bike6_zpse9c1f185.jpg.html?sort=3&o=0#/user/cafehusky/media/bike6_zpse9c1f185.jpg.html?sort=3&o=0&_suid=1373851249916023026054161143217[/img][img]http://s861.photobucket.com/user/cafehusky/media/bike6_zpse9c1f185.jpg.html?sort=3&o=0#/user/cafehusky/media/bike1_zps8fbbd931.jpg.html?sort=3&o=5&_suid=1373851249916023026054161143217[img]http://s861.photobucket.com/user/cafehusky/media/bike6_zpse9c1f185.jpg.html?sort=3&o=0#/user/cafehusky/media/bike1_zps8fbbd931.jpg.html?sort=3&o=5&_suid=1373851249916023026054161143217[/img]
I am almost finished but heres a peek




some new stuff












Yz250Cr500 8/8/2013 12:45pm
8/8/2013 12:45pm
TAMBURELLO wrote:
I am almost finished but heres a peek [img]http://s861.photobucket.com/user/cafehusky/media/bike6_zpse9c1f185.jpg.html?sort=3&o=0#/user/cafehusky/media/bike6_zpse9c1f185.jpg.html?sort=3&o=0&_suid=1373851249916023026054161143217[/img][img]http://s861.photobucket.com/user/cafehusky/media/bike6_zpse9c1f185.jpg.html?sort=3&o=0#/user/cafehusky/media/bike1_zps8fbbd931.jpg.html?sort=3&o=5&_suid=1373851249916023026054161143217[img]http://s861.photobucket.com/user/cafehusky/media/bike6_zpse9c1f185.jpg.html?sort=3&o=0#/user/cafehusky/media/bike1_zps8fbbd931.jpg.html?sort=3&o=5&_suid=1373851249916023026054161143217[/img]
I am almost finished but heres a peek

I've just purchased a 85 Cr125 and would be interested in one please.
Yz250Cr500 8/8/2013 12:48pm
8/8/2013 12:48pm
I've just purchased a 85 Cr125 and would be interested in one please.

The Shop

See All »
jzazella
Profile picture for user jzazella
Posts
20
Joined
10/10/2012
Location
Phoenix, AZ, USA
jzazella 8/8/2013 1:29pm
8/8/2013 1:29pm
dave.bonz.9 wrote:
Maybe by this summer me and my good machine shop friend are going to bld a water pump the bolts right to the place where the...
Maybe by this summer me and my good machine shop friend are going to bld a water pump the bolts right to the place where the water pump cover bolts to ,,,to FIX ALL THESE JUNK water pump side cover on the 84 - 86 cr 125 & 250 .. Not sure on the price yet.. but wanna keep it under $ 300.00 - 350.00 if i can. + i'll make it out of alum and not mag like the stock ones..
Put me down for one!! 85 250.
braydon616 8/28/2013 11:23pm
8/28/2013 11:23pm
Hi
I was wondering how this project was going as I'm very interested in a clutch cover for a 1986 CR125...
Is there an email address I can use to contact you rbengineering/Rich?
Requiring one for a project,
Thanks
MaxOne
Profile picture for user MaxOne
Posts
8
Joined
10/2/2009
Location
New York, NY, USA
MaxOne 11/1/2013 7:07pm
11/1/2013 7:07pm
rbengineering wrote:
HI guys, ok I hope to show some updates again soon, I need to reply though as I appreciate it's taking a long time and I...
HI guys, ok I hope to show some updates again soon, I need to reply though as I appreciate it's taking a long time and I get many emails on this project.
Unfortunately this is not so much because of any other reason than that my business is very very busy and I am the only person doing the work.
This project started out as an enquiry from a friend and has spiralled since then and I have lots of engine work gong on.
One thing I need to get across is that I only intend to machine these for the 84 & 85 cr125 at this time as that's what my has and as I have had many enquiries for other bikes I just cannot promise to get those done.
I will press on over the next few weeks and try to get the updates on here and possibly test the cover in the not too distant future.
I have already put many hours into this so please have faith as it is still sat on the machine waiting for my next spare day, it will get done and tested as soon as I get some spare time to machine the next stage.

Kind regards Rich.
Hi Rich ,

any update on the cover yet ? Thank you !

Regards

Max
eskaze911 11/29/2013 3:57am
11/29/2013 3:57am
Hi there is a company doing the covers now in aluminium.
Search E Bay uk honda cr clutch cover.
They aint cheap tho....
bouman.9
Profile picture for user bouman.9
Posts
13
Joined
6/19/2013
Location
NL
bouman.9 11/29/2013 5:59am
11/29/2013 5:59am
Can some one confirm this inner cover witch still produce new by honda is made off aluminium?
redracing
Profile picture for user redracing
Posts
2
Joined
10/26/2013
Location
Nursery, TX, USA
redracing 1/25/2014 10:43pm
1/25/2014 10:43pm
rbengineering wrote:
Hi all, I run a small cnc engineering company in my spare time and it's pretty much bespoke motorcyle parts I make. I have received a...
Hi all, I run a small cnc engineering company in my spare time and it's pretty much bespoke motorcyle parts I make.
I have received a request from a customer to manufacture some billet aluminium clutch and waterpump covers for a 1985 CR125 to replace the heavily corroded magnesium ones he has, and was directed by the owner to this site to see if there is any more interest?
I also would be very interested to hear which years this would fit i.e. '84 and '86 etc.
So if there is any interest in these, please post here and also post any other info that may be useful.
Also we are aiming to make this from aircraft grade aluminium 6082-T6 which is a slightly stronger alloy than the 6061 spec.
It would be a new design to enable the clutch to be worked on without removing the whole cover.
The price would be kept as low as possible and is looking like £295 / $475 will be likely. Please bear in mind the cost of the aluminium billet required as it is substantial.

Kind Regards, Rich Bearcroft
Were do I put my order in for a cover
rbengineering 1/26/2014 1:51am
1/26/2014 1:51am
Hi Guys been a long time, and I have done more on these, however it's not something I get much time to do and I found a brand new Honda cover at my local shop so my original customer bought that, I could not believe they had one and they only found it clearing out old stock.
I will see this project through but time is at such a premium and it is a big task to finish.
If you really need one fast then the link above may be your only option for now.
I will as soon as possible press on with it, I am sorry it's taking so long but I am constantly snowed under by my regular work and I have to pay the bills!

Kind Regards

Richard
lolclown
Profile picture for user lolclown
Posts
1
Joined
1/27/2014
Location
CA
lolclown 1/27/2014 8:40pm
1/27/2014 8:40pm
rbengineering wrote:
Hi Guys been a long time, and I have done more on these, however it's not something I get much time to do and I found...
Hi Guys been a long time, and I have done more on these, however it's not something I get much time to do and I found a brand new Honda cover at my local shop so my original customer bought that, I could not believe they had one and they only found it clearing out old stock.
I will see this project through but time is at such a premium and it is a big task to finish.
If you really need one fast then the link above may be your only option for now.
I will as soon as possible press on with it, I am sorry it's taking so long but I am constantly snowed under by my regular work and I have to pay the bills!

Kind Regards

Richard
Oh SHUT UP! we are all sick of your fucking excuses! ohhh i dont have time ohhhhh shiiiitttt
iii dont have time to make and sell a little cover for $700 a piece.
Seriously if you dont plan on making any within the next 4 months the GET THE FUCK OUT!
rbengineering 1/27/2014 11:45pm
1/27/2014 11:45pm
rbengineering wrote:
Hi Guys been a long time, and I have done more on these, however it's not something I get much time to do and I found...
Hi Guys been a long time, and I have done more on these, however it's not something I get much time to do and I found a brand new Honda cover at my local shop so my original customer bought that, I could not believe they had one and they only found it clearing out old stock.
I will see this project through but time is at such a premium and it is a big task to finish.
If you really need one fast then the link above may be your only option for now.
I will as soon as possible press on with it, I am sorry it's taking so long but I am constantly snowed under by my regular work and I have to pay the bills!

Kind Regards

Richard
lolclown wrote:
Oh SHUT UP! we are all sick of your fucking excuses! ohhh i dont have time ohhhhh shiiiitttt iii dont have time to make and sell...
Oh SHUT UP! we are all sick of your fucking excuses! ohhh i dont have time ohhhhh shiiiitttt
iii dont have time to make and sell a little cover for $700 a piece.
Seriously if you dont plan on making any within the next 4 months the GET THE FUCK OUT!
Nice manners, don't suffer with that sort of behaviour here so it's a shame you don't get your facts right either. It isn't a 5 minute job I work 2 full time jobs just to pay the bills so I REALLY DO NOT HAVE A LOT OF TIME ON MY HANDS. It's been sat on my machine for all this time because it's wrecked if I move it without finishing it completely, it's causing me headaches tying up the machine which slows my other work but I would love to get it done as there seems very little else available, very sorry about that but if everybody is that pissed off then I see no point anymore.
Maybe there is a reason nobody else has bothered!
I have spent countless hours on it already, and it's never been anywhere near $700 dollars either, where did you get that from?
Not to worry, I understand it's taking ages so if nobody is prepared to wait any longer, let me know so I can bin it and use my machine.

Kind regards

Rich.
OverdooZ
Profile picture for user OverdooZ
Posts
4
Joined
2/5/2014
Location
SE
OverdooZ 2/5/2014 8:04am
2/5/2014 8:04am
rbengineering wrote:
Hi Guys been a long time, and I have done more on these, however it's not something I get much time to do and I found...
Hi Guys been a long time, and I have done more on these, however it's not something I get much time to do and I found a brand new Honda cover at my local shop so my original customer bought that, I could not believe they had one and they only found it clearing out old stock.
I will see this project through but time is at such a premium and it is a big task to finish.
If you really need one fast then the link above may be your only option for now.
I will as soon as possible press on with it, I am sorry it's taking so long but I am constantly snowed under by my regular work and I have to pay the bills!

Kind Regards

Richard
lolclown wrote:
Oh SHUT UP! we are all sick of your fucking excuses! ohhh i dont have time ohhhhh shiiiitttt iii dont have time to make and sell...
Oh SHUT UP! we are all sick of your fucking excuses! ohhh i dont have time ohhhhh shiiiitttt
iii dont have time to make and sell a little cover for $700 a piece.
Seriously if you dont plan on making any within the next 4 months the GET THE FUCK OUT!
Well i dubt that will inspire him to go on with his project. If you dont have anything good to say then dont open your mouth.
And for the record, if you gonna complain, make a cover yourself.

I dont think many people understand how much work it's to make a copy.

I hope the cover will be finish, just as much as everybody else who has a cr with rotten cover. I hope my cr125r 1986 will brap some day. cause it's amazing bike.

Keep the good work up =)
jtracing6
Profile picture for user jtracing6
Posts
588
Joined
11/26/2009
Location
Dundalk, IE
jtracing6 2/5/2014 8:33am
2/5/2014 8:33am
You can always put one of these on your bike as I did on mine. Available on ebay.co.uk
TAMBURELLO above has one on his 1985 CR125.


OverdooZ
Profile picture for user OverdooZ
Posts
4
Joined
2/5/2014
Location
SE
OverdooZ 2/5/2014 9:00am
2/5/2014 9:00am Edited Date/Time 2/5/2014 10:30am
I just searched ebay.co.uk but i could not find no clutch cover?

Anyway, how's things going with the clutch cover RB? =)
jtracing6
Profile picture for user jtracing6
Posts
588
Joined
11/26/2009
Location
Dundalk, IE
jtracing6 2/5/2014 11:32am
2/5/2014 11:32am
This is the guy you are looking for

evosrus@hotmail.co.uk.

he has stock, just maybe his ebay ad finished.

Pit Row

See All »
rbengineering 2/5/2014 12:20pm
2/5/2014 12:20pm
OverdooZ wrote:
I just searched ebay.co.uk but i could not find no clutch cover?

Anyway, how's things going with the clutch cover RB? =)
Hi Overdooz, private message sen about billet covert. Those cast covers are on ebay.co.uk and are £420, maybe its not available to view in some countries.

Kind regards

Rich
MaxPower
Profile picture for user MaxPower
Posts
2700
Joined
8/15/2006
Location
USA
MaxPower 2/5/2014 1:04pm
2/5/2014 1:04pm
lolclown wrote:
Oh SHUT UP! we are all sick of your fucking excuses! ohhh i dont have time ohhhhh shiiiitttt iii dont have time to make and sell...
Oh SHUT UP! we are all sick of your fucking excuses! ohhh i dont have time ohhhhh shiiiitttt
iii dont have time to make and sell a little cover for $700 a piece.
Seriously if you dont plan on making any within the next 4 months the GET THE FUCK OUT!
Why sign on under a different screen name to talk shit instead of your regular name? What are you afraid of? Or have you been lurking for months in the corner with a busted water pump cover and now you find your voice?
OverdooZ
Profile picture for user OverdooZ
Posts
4
Joined
2/5/2014
Location
SE
OverdooZ 2/6/2014 11:42pm
2/6/2014 11:42pm
THX! I saw it yesterday.

I asked him about warranty etc. dont just want to buy, casue it's a lot of money. £420 is about 5k SWE.kr and probely much more then many paid for thier bikes.
davon95
Profile picture for user davon95
Posts
4
Joined
8/15/2013
Location
Fox Lake, IL, USA
davon95 5/24/2014 2:27am
5/24/2014 2:27am
rbengineering wrote:
Hi all, I run a small cnc engineering company in my spare time and it's pretty much bespoke motorcyle parts I make. I have received a...
Hi all, I run a small cnc engineering company in my spare time and it's pretty much bespoke motorcyle parts I make.
I have received a request from a customer to manufacture some billet aluminium clutch and waterpump covers for a 1985 CR125 to replace the heavily corroded magnesium ones he has, and was directed by the owner to this site to see if there is any more interest?
I also would be very interested to hear which years this would fit i.e. '84 and '86 etc.
So if there is any interest in these, please post here and also post any other info that may be useful.
Also we are aiming to make this from aircraft grade aluminium 6082-T6 which is a slightly stronger alloy than the 6061 spec.
It would be a new design to enable the clutch to be worked on without removing the whole cover.
The price would be kept as low as possible and is looking like £295 / $475 will be likely. Please bear in mind the cost of the aluminium billet required as it is substantial.

Kind Regards, Rich Bearcroft
Hi will it fit the 83 cr 125 if so I would buy one.
davon95
Profile picture for user davon95
Posts
4
Joined
8/15/2013
Location
Fox Lake, IL, USA
davon95 5/24/2014 2:31am
5/24/2014 2:31am
jtracing6 wrote:
Rich I have clutch covers new in aluminium for the 1986 Honda CR125. They don't show up as the same part number but I haven't tried...
Rich
I have clutch covers new in aluminium for the 1986 Honda CR125. They don't show up as the same part number but I haven't tried to fit them on a 1984 or 1985. I have heard talk that they are interchangeable but cannot vouch for that.
Are you interested to make HONDA RACING ignition covers for the 1986 CR125? These will fit the 1984 and 1985.

Hi does that new cover fit a 83 cr 125 if so I will take one .
jtracing6
Profile picture for user jtracing6
Posts
588
Joined
11/26/2009
Location
Dundalk, IE
jtracing6 5/24/2014 2:52am
5/24/2014 2:52am
jtracing6 wrote:
Rich I have clutch covers new in aluminium for the 1986 Honda CR125. They don't show up as the same part number but I haven't tried...
Rich
I have clutch covers new in aluminium for the 1986 Honda CR125. They don't show up as the same part number but I haven't tried to fit them on a 1984 or 1985. I have heard talk that they are interchangeable but cannot vouch for that.
Are you interested to make HONDA RACING ignition covers for the 1986 CR125? These will fit the 1984 and 1985.

davon95 wrote:
Hi does that new cover fit a 83 cr 125 if so I will take one .
This cover is for the 1986 CR125 and will fit a 1985 with a 1986 impeller. The same guy has covers for the 1983 CR125. evosrus@hotmail.co.uk ask for Warren Berthiaume.
OverdooZ
Profile picture for user OverdooZ
Posts
4
Joined
2/5/2014
Location
SE
OverdooZ 5/26/2014 5:59am
5/26/2014 5:59am Edited Date/Time 5/26/2014 6:17am
Hi

I bought a cover from evorus and it works great, prefect fitment and all sealings fits good Smile

Sadly the threads for the oil drain plug is gone and gearbox is stuck at first gear Sad so i have to fix that before i ride it again. Enought OT

I can strongly recommend buying from evorus. You wont regret it Smile
kellylicon 5/27/2014 4:45pm
5/27/2014 4:45pm
I have a 1985 CR125 with the MUGEN kit, I am in dire need of one of these. Who and or where would be the best point of contact? Thanks in advance.
jtracing6
Profile picture for user jtracing6
Posts
588
Joined
11/26/2009
Location
Dundalk, IE
jtracing6 5/27/2014 5:45pm
5/27/2014 5:45pm
kellylicon wrote:
I have a 1985 CR125 with the MUGEN kit, I am in dire need of one of these. Who and or where would be the best...
I have a 1985 CR125 with the MUGEN kit, I am in dire need of one of these. Who and or where would be the best point of contact? Thanks in advance.
See the post 2 above from me and contact evosrus@hotmmail.co.uk
Hudweiser9
Profile picture for user Hudweiser9
Posts
636
Joined
4/8/2014
Location
Ormond Beach, FL, USA
Hudweiser9 5/29/2014 7:54pm
5/29/2014 7:54pm
Not to hijack the thread, but is anyone making a replacement cover for the '85 CR250R? I see there is a dude from Australia that is making sand cast covers for the '84 CR250R. I was lucky enough to find an NOS cover for mine, but would like to have a spare... Thanks.

rolland
Profile picture for user rolland
Posts
2
Joined
3/2/2015
Location
RO
rolland 3/2/2015 3:31am
3/2/2015 3:31am
rbengineering wrote:
Dave cool, you certainly got a lot more bikes in the US than here in the UK, you are gonna be busy if it takes off...
Dave cool, you certainly got a lot more bikes in the US than here in the UK, you are gonna be busy if it takes off.

Here is the latest cad model of the billet cover with the clutch inspection cover also fitted to it.

Rich

hi,
I want to ask if it is possible to give me the 3D model of the cover with the clutch. I would like to make (in the CNC) in the same way like you did. If is possible in Step or IGS extension or any CATIA extension. Thanks in advance.

Post a reply to: CR125 Clutch waterpump cover