Emulators

thomas mitchell
Edited Date/Time 8/12/2013 7:18am
What do you guys use for a damper rod bolt when putting in emulators? I would like to source a bolt instead of cutting off the compression valve part of my exsisting bolt. The forks are off a 1984 YZ 250 ( KYB ).
|
MaxPower
Profile picture for user MaxPower
Posts
2701
Joined
8/15/2006
Location
USA
MaxPower 8/7/2013 3:52pm
8/7/2013 3:52pm
Is it possible to use a the pressure from pushing a broom stick inside the fork while hitting the bolt with a air gun on your forks?
newmann
Profile picture for user newmann
Posts
24437
Joined
4/1/2008
Location
USA
newmann 8/7/2013 3:54pm
8/7/2013 3:54pm
Chris Reisenberg from Race Tech posts here on Vital. He should be able to get you some info possibly or have you contacted Race Tech directly?
thomas mitchell 8/8/2013 9:12am
8/8/2013 9:12am
I talked via email with Race tech but they said I would have to find my own bolt. I took a shot and ordered a damper rod bolt from an '82 YZ 250 and had no luck. It didn't fit.
FreshTopEnd
Profile picture for user FreshTopEnd
Posts
13311
Joined
8/16/2006
Location
Sacramento, CA, USA
FreshTopEnd 8/8/2013 9:33am
8/8/2013 9:33am
Do you have some pics to illustrate what you're after?

The Shop

See All »
captmoto
Profile picture for user captmoto
Posts
5898
Joined
4/22/2009
Location
Rancho Cucamonga, CA, USA
captmoto 8/9/2013 4:41pm
8/9/2013 4:41pm
Buy a second set if you can and cut those. IMO you won't be going back once you get the Emulators set up.
Kidkawie
Profile picture for user Kidkawie
Posts
1191
Joined
8/31/2012
Location
ქუთაისი, GE
Kidkawie 8/12/2013 7:16am
8/12/2013 7:16am
Do you know the thread size and pitch?

Post a reply to: Emulators