1983 CR250 radiator hoses needed

Edited Date/Time 1/27/2012 12:59am
I need a set of radiator hoses for my '83CR250. The '83 radiator hoses are a one year only and they differ from the '82 and '84 hoses.
Honda no longer carries them and ebay is coming up blank, aftermarket is also.

Anybody know where to get a set?
|
newmann
Posts
24437
Joined
4/1/2008
Location
USA
9/24/2011 12:34pm
Check with Lumpy here on Vital. He's the Moto Hose guy. I'll eventually need a set for my 83 CR250 also.
lumpy790
Posts
11872
Joined
9/18/2007
Location
York, SC, USA
9/25/2011 7:51am
Only fitting 1 year makes it tough......but not impossible. We need to pre-sell 3 kits and get a sample set of hoses to make it happen.

Spread the word and see if others want them.
newmann
Posts
24437
Joined
4/1/2008
Location
USA
9/25/2011 8:34am
I think mine are good. Could send them for a sample.
9/25/2011 2:50pm
newmann wrote:
I think mine are good. Could send them for a sample.
I am good for at least one set, how about you Newman? If we get a commitment for 3 sets can you send your hose set in? My hoses are not going to make it much longer.

Any other 1983 CR250 owners out there that want or need a set of radiator hoses?

The Shop

newmann
Posts
24437
Joined
4/1/2008
Location
USA
9/25/2011 4:05pm
Post it up on the honda-elsinore site and Mark's Motorcycle Swapmeet.
flyingdg
Posts
28
Joined
5/19/2011
Location
Deweyville, UT, USA
9/26/2011 7:23am
How much would a set cost?
lumpy790
Posts
11872
Joined
9/18/2007
Location
York, SC, USA
9/26/2011 10:58am
The 83 is a Y hose setup so your looking at $145 to replace radiator hoses, (Y hose is 1 piece) radiator overflow hose, carb hoses, trans breather, gas cap hose.
Whymee
Posts
612
Joined
12/17/2009
Location
USA
10/23/2011 10:01am Edited Date/Time 10/24/2011 3:52pm
I am interested in a set.

What colors will be available?

I prefer basic black....

I MIGHT be in for more sets. I need to check with some peeps first....

Stan
lumpy790
Posts
11872
Joined
9/18/2007
Location
York, SC, USA
10/24/2011 2:07pm
For that we would only do 1 color to start.......Blue would be the best.
Whymee
Posts
612
Joined
12/17/2009
Location
USA
10/24/2011 3:49pm Edited Date/Time 10/24/2011 3:53pm
I am in for 2 sets.

I hope this includes the small diameter hose that connects the rads at the top of the radiators.

I really really want basic black. Can we make it happen?

Any idea when these kits will ship?

Stan
#415
FreshTopEnd
Posts
13352
Joined
8/16/2006
Location
Sacramento, CA, USA
10/24/2011 4:41pm
I am pretty sure they were black OEM, and IMO if you're going to repop them in only one color black should be it.
10/25/2011 2:23pm
Whymee wrote:
I am in for 2 sets. I hope this includes the small diameter hose that connects the rads at the top of the radiators. I really...
I am in for 2 sets.

I hope this includes the small diameter hose that connects the rads at the top of the radiators.

I really really want basic black. Can we make it happen?

Any idea when these kits will ship?

Stan
#415
If Stan is good for 2 sets and I am good for one set (I would prefer black as the color, but I will take what I can get), we now have 3 committments, when can we repo the 1983 hoses?
My current hoses will not last much longer, as we all know, no hoses = no riding.

I do not have an extra set of 1983 CR250 hoses, who can send the set to be repoed to Moto Hose?

I was very happy to see that Motohose did a repo on the 1988/89 CR250 hoses, I already put the new set on my bike and they work great.

Let's get the ball rolling!!!

Who is sending the hoses for repo? Stan, if you have an extra set of hoses can you contact Motohose?
Whymee
Posts
612
Joined
12/17/2009
Location
USA
10/25/2011 4:47pm
Let me check my vast & seemingly endless goodie box & see what I have.

Get back in a few...

Stan
Whymee
Posts
612
Joined
12/17/2009
Location
USA
10/25/2011 4:53pm
I do not have a complete set. I would have to pull a set off of one of my bikes. And with my work load, that could be a while...

Any body else?

Additionally...

The "Y" hose is not one piece. As far as I am concerned it does not have to be one piece. Might be cheaper overall to produce. I am just sayin...


Stan
lumpy790
Posts
11872
Joined
9/18/2007
Location
York, SC, USA
10/29/2011 9:05pm
We have to make more than 3 when we make them so with us making an investment to have them made.......sorry we only make colored hoses....not black......so we can make them in Blue and in one piece Y hoses.

We will need a complete set of radiator hoses.....without removing the Y piece.
Whymee
Posts
612
Joined
12/17/2009
Location
USA
10/29/2011 11:42pm
Well then...

I will take 2 sets in red verses blue. What say you Koolstrike?

Stan

#415
10/30/2011 6:59pm
Stan:

Red it is. I will take 1 set of hoses, can you supply the hoses to be copied?

Is 3 sets enough to get the made?
newmann
Posts
24437
Joined
4/1/2008
Location
USA
10/31/2011 10:07am
I wouldn't really be interested in anything but black, so count me out for now. If no one else can come up with a set to copy, I can pull mine off and send in.
CamP
Posts
6826
Joined
8/16/2006
Location
Colleyville, TX, USA
10/31/2011 10:27am
If you can figure out how to produce the hoses in black, you'll get a lot more business from the vintage crowd.
Whymee
Posts
612
Joined
12/17/2009
Location
USA
10/31/2011 4:31pm
CamP wrote:
If you can figure out how to produce the hoses in black, you'll get a lot more business from the vintage crowd.
I agree with the above poster. I don't need any bling on my bikes.

Stan

Post a reply to: 1983 CR250 radiator hoses needed

The Latest