I have a quick question about wheel compatibility between Yamahas. As some of you might have seen in the moto section, I broke my chain guide off upon landing a big jump at Endurocross on my yz250, which subsequently led to a shattered hub, ego, and more sprocket bolt comments on my IG then I'd care to admit. Another member here gave me a great deal on a current generation yz250f swingarm and linkage, so I'm covered there, however I still need a wheel to replace my broken one that fits. As far as I know the 250f uses a slightly larger rear axel than my two stroke (mine is a 15), but I'm mainly just concerned about the hubs fitting since I can swap bearings if need be.
I basically need to know what year bikes have hubs have the same dimension as the current generation yz250f. I looked up part numbers and saw that they are different between the two and four strokes, but that could be for a number of reasons that aren't crucial to fitment. I am not against putting an 18" on the back since I do a lot of offroad, so if wheels from a WR250 or 450 would fit that would be great. I have a hard time believing there is a width difference between all of these bikes, but I could be wrong so if anyone has any knowledge in this area that would be great.
Thanks for any insight, sorry for the long post but I wanted to be thorough in explaining what I'm looking for.
Make Hillclimb Great Again
Ratbeach Racing
Instagram / YouTube: @485Josh
3dpmoto.com