Risk Racing Lock & Load

Love my Risk Racing Lock-N-Load and gas can.



KTM is a tight fight with about 2 inches to spare so this is how I positioned the bike then put in 2 screws then removed bike and put in the rest of the screws.



Dual sport is a little longer so had to angle it and turn jaw around and it still works great

I had the prior generation in my old toy hauler and they were still legit. Had to be more precise in getting the bike straight than the new version but still work amazing. Only downfall is you have to drill into the floor, but you would with a tire chock too. Never had a bike come loose and well worth the $$$

I had them. They work fine. Not sure if worth the money tho.

You can build your own at tractor supply etc. some e channel, 2 anchors and two turnbuckles with hooks on one end.

I would do your own. Between me and my riding friends we have sent back 4 sets. The gas cans havent been the best either, but they look awesome lol.

My buddy had them in his ‘20 sprinter. He drilled thru his floor and had large washers on the bottom side to stabilize them.
He eventually decided to change the floor in his van, so he removed them to install floor. When he was under the van, he noticed that the sheet metal was tearing and he had to weld some reinforcement metal under his van to keep it from getting worse.
He reinstalled the lock and load mounts, but the cracking continued. He removed them and is back to using his tie downs again.
Glad I didn’t go down this path on my new van !!

Risk makes great stuff. Haven’t got the lock and load yet, but it’s on the short list.

I’d love to try them I just can’t see myself drilling into my truck.

We have two inside of our enclosed trailer… they work wonderfully… worth the money.

We haven’t had any issues

I’ve been using them for years and would buy again. I had one crack, but had it rewelded for $20.

They work awesome

I have 4 in our race trailer. They are the only thing I’ll ever use.

I've had them in my motovan for a year and a half and love them.

Make sure you buy an extra set of the rubbers for the jaws if you pick up one.

How do the new style Lock N Loads mount to the floor? I was thinking of getting some new styled ones. How does the plate and such mount?

I’m a big fan of bolt it on if you have any spots for flush mounted D rings or are using a van with factory seat mounts. Literally takes 30 seconds to install and take out.

Nice set up! What size is this trailer?

Have the Risk can and some pants, good stuff. Been using Moto Cinch tie downs for several years. Gave me a few more option and cleaner install. In hate straps and no longer have a need for them.