Rim lacing pros, please help

gooneymferlife
Edited Date/Time 1/12/2020 5:34pm
Just attempted to lace a wheel for the first time. Followed the youtube vid by Rocky Mtn atv/mc and I wound up with every other nipple being way further up the threads. Does the hub need to be reversed? Should I just give up and sell my bike? Help!

|
mwssquad827
Profile picture for user mwssquad827
Posts
1463
Joined
8/4/2016
Location
Twin Falls, ID US
mwssquad827 1/12/2020 3:40pm
1/12/2020 3:40pm Edited Date/Time 1/12/2020 3:40pm
Spokes are placed Incorrectly...undo and try again..
2
Markee
Profile picture for user Markee
Posts
3544
Joined
4/15/2013
Location
Suffolk, VA US
Fantasy
1941st
Markee 1/12/2020 3:40pm
1/12/2020 3:40pm
Need A better photo of your pattern.

Your side that is closest to the table seems right.

The Shop

See All »
mirramaxx
Profile picture for user mirramaxx
Posts
887
Joined
12/15/2011
Location
NE US
mirramaxx 1/12/2020 3:47pm
1/12/2020 3:47pm Edited Date/Time 1/12/2020 3:50pm
Honda is a 3 cross up front. Back longer spokes outside. Download a service manual that matches the bike :]
Flyin-W
Profile picture for user Flyin-W
Posts
42
Joined
11/14/2011
Location
CA
Flyin-W 1/12/2020 5:07pm
1/12/2020 5:07pm
Hard to tell from your pic but it looks like you've got cross three on the bottom and cross two on the top.
1
crc245
Profile picture for user crc245
Posts
1089
Joined
10/29/2007
Location
Yorba Linda, CA US
crc245 1/12/2020 5:34pm
1/12/2020 5:34pm
Flyin-W nailed it: Honda (and new FE KTM/Husqvarna's) runs three-cross. Re-do disc side and you should be set. Install outer spokes first, then inners btw: Keeps you from criss-crossing your way into more problems!

Post a reply to: Rim lacing pros, please help