All

I know Keefer put out an updated map for the 25 but you can't make the ignition adjustments on the 24 because you're limited to +1. Is flashing the 24 ecu to the 25 parameters an option?

I know there are certain bolts that have copper washers on them but this specific bolt isn’t supposed to have one. Heard back today and the Kawasaki rep is authorizing this as the fix even though they’ve acknowledged the kawi bond sealant is what’s leaking. Seems the proper fix would be to address that instead of adding a copper washer...

Left hand side lower crank case bolt at the rear of the engine

Definitely. Just wanted to get others opinions on what I’m seeing since the parts breakdown I’ve looked at shows no washers for the left side lower crank case bolts and make sure I’m not completely missing something when I’m looking at the parts breakdown. I really just want my bike back but I don’t want the repair to be a...

I don’t doubt Kawasaki is telling them what to do. My concern is that upon initially removing the crank case bolt to try to fix the issue (which Kawasaki instructed them to do) wouldn’t they have noticed a copper washer missing and start there instead of trying to apply silicone to the bolt to try to seal everything up? We’re...

Did you figure out your leak? My bike has been at the shop for two weeks so far. They addressed the leaking crank bolt per kawasakis direction trying to remove it and reseal it without pulling the motor and cracking the case. Bike still leaked. After some back and forth Kawasaki told them to add a tracer material into the...

It’s the lower bolt. Not the one under the shifter

2024 kx450x with 3.5hrs on it. Have an oil leak I couldn’t pinpoint. Took it back to the dealer who found it is a lower crank case bolt leaking and they’re telling me the only way to get the bolt out is to pull the whole motor. They want to try to silicone the bolt back in to stop the...