All

Wanted to buy heavy flywheel to suit 2009 - 2016 Honda CRF450 preferably a trail tech or Steahly and willing to ship to Australia at my expense of course.

Wanted to buy black stadium plate to suit 2008 - 2009 CRF250 and 2008 CRF450. Struggling to find available stock anywhere, would be happy with good condition second hand. Thank you.

Hey all, I have bought a low hour stock 2014 CRF450 and have replaced the fork seals and replaced the oil in the inner chambers. When I’ve pumped the forks up to 34.5 psi it seems the forks aren’t rebounding to their full length after being compressed. It seems like the air pressure isn’t enough to completely overcome the spring...

Wanted to buy Honda CRF hubs, preferably red, black or silver to suit 36 spoke front and 32 spoke rear, Any reputable brand considered.

looking to buy an ohlins shock to suit a steel framed CR125 years 1993 - 1997 preferably 1993 but I can make either years work out Cheers

Wanted to buy an oem camshaft and exhaust valve rocker in usable condition,

Hey all, Im about to start a build of my 1994 Honda CR125, I'm looking to put more modern suspension on it and have acquired an Ohlins shock off of a 2008 TM250F and I'm looking to make it work with the Honda. The problem I'm having is the top mount which connects the shock body to the reservoir is...

Ive done a bit of a search but can't find too much information about anyone getting a newer Standard showa CRF shock onto a steel framed CR. It looks like the CRF Showa is 20mm wide at the top mounting point opposed to the 19mm CR125 one, which I should be able to come up with something to make it...

Ive recently sent my cylinder away to be replated here in AUS due to it having a chip in the nikasil. The cylinder has returned with the chip still there, Ive sent it back another 2 times to have it fixed properly but apparently due to a defect in the cylinder it is pretty much as good as it will...