Recent Activity
All
RMiller227 Added a reply to Motocar Fite Club... Excited???
2/25/2021 5:57pm This is fucking terrible. Buddy spent $40 to watch 3 sight laps per race and a bunch of tire commercials
More »
RMiller227 Added a reply to 2021 KTMs and Husky’s being announced this week?
6/22/2020 10:17am If you haven't yet, call one of your local dealers. The one near me is getting the 65 & 85 in this week. Unsure if they would know when the big bikes are coming in yet.
RMiller227 Added a reply to Another RM build Update
8/15/2018 12:29pm With the aluminum tank you can run 14-16 rmz450 shrouds and with aftermarket triple clamps you can run the 450 front fender. As for the side plates i looks like he cut them. https://www.theracinstation.com/m/product.htm?id=-8048752 This company is now doing aluminum tanks. When i ordered mine you could only get them from Italy. This will at least work for your 125...
RMiller227 Started a new thread 2007 RM 250
9/19/2017 2:03pm After a year and half and roughly 8k later I am finally able to post this build. Purchased this bike May 2016 from a guy near state college. Bike started right up but looked like it fell off of a truck driving down the interstate. Even though he stated the top and bottom end were "freshly rebuilt" i was skeptical...
This forum thread has 24 replies.
RMiller227 Added a reply to 2007 RM 250
9/19/2017 8:33am where did you get the carbon fiber frame guards?
RMiller227 Added a reply to 2007 RM 250
9/19/2017 8:29am working on the design of the graphics kit no with a local company near me called Limited Decal
RMiller227 Added a reply to 2007 RM 250
9/14/2017 6:55pm Thanks. Tank was a little tight. The frame bolts worked fine but the seat bolt I needed to get a longer one and add some shims. Will probably need to add some kind of foam at the nose of the seat. Didn't take a too many adjustments. Would recommend if anyone is thinking of it.
RMiller227 Added a reply to 2007 RM 250
9/14/2017 10:59am we actually got some kind of winter special on the coating. cost about $150 to do the forks and parts of the shock. my suspension guy sent them to someone he uses. not sure who it was unfortunately.
RMiller227 Added a reply to 2007 RM 250
9/14/2017 5:12am good eye. yes it was. both the seat mounts were broken off. they had a hose clamp around the master cylinders because he broke a bolt off in both of them. there wasn't a kill switch. crazy how some take care of their equipment.
RMiller227 Added a reply to 2007 RM 250
9/13/2017 6:10pm With all the rm builds out there i was piecing together some ideas to top this bike off. one that really stuck out was the aluminum tanks and whether or not to go with flo yellow or basic suzuki yellow. i opted out of the flo yellow but splurged on the aluminum tank to let it stand out from the...
RMiller227 Added a reply to 2007 RM 250
9/13/2017 6:06pm With much help from a couple of friends on the motor, the assembly process was back in action and it was ready to be put back home in the frame. 
RMiller227 Added a reply to 2007 RM 250
9/13/2017 6:30pm while waiting for the unexpected parts and my bank account to get over the initial shock of high dollar online mx shopping carts, i picked up my freshly powder coated frame and swing arm. Had my suspension valved and sprung with EVO industries and also had them anodized. 
added black excels with talon mag hubs...
added black excels with talon mag hubs...
RMiller227 Added a reply to 2007 RM 250
9/13/2017 6:30pm next up was breaking down the engine to see what kind of mess i was getting into. The cylinder head had obvious signs from a previous piston exploding (not sure where that pic is). power valve was gunked up of course but in working order. The bottom end soon became the cherry on top. My intentions right away were to...
RMiller227 Added a reply to 2007 RM 250
9/13/2017 5:21pm
RMiller227 Added a reply to Another RM build Update
6/19/2017 11:36am so i got my aluminum tank. they were kind enough to give me the 450 shrouds, but when installed they do not sit flush on the tank. this prohibits the seat from being able to catch the tank bolt . has anyone else with an aluminum had issues with this? any special modification trick which has worked?
RMiller227 Added a reply to Another RM build Update
6/8/2017 6:49am they are out of idaho. spoke with him yesterday. give them a call. have a few in stock
RMiller227 Added a reply to Another RM build Update
6/6/2017 11:35am how long did it take for you to receive your fuel tank? ordered mine the other week
RMiller227 Added a reply to Another RM build Update
5/10/2017 1:10pm is the italy manufacturer the only way to get the aluminum tank? finishing up my 2007 250 and want to add that as the final touch
RMiller227 Added a reply to Show your Yz250 smoker
2/21/2017 8:31am
RMiller227 Added a reply to My Wallet Talked. It Said 2017 250sx. (Ride Update)
7/12/2016 10:59am i had the privilege of riding this bike saturday for a practice session. being a full time 450 rider, i jumped on this thing and felt comfortable right away. tons of bottom for a 2 stroke and a nice smooth hit mid-top. anyone that is contemplating buying one should.