Recent Activity
All
brax_stang Liked a reply to forum topic Need help figuring out which triple clamps and wheel hubs will fit 2003 kx250
6/4/2020 8:35pm
Right now I have a 2003 kx250 with the txrace 2018 restyle kit and I have 2015 kx450f sff air forks with stock everything up front(other than a front brake cable and shaving the top triple clamps a little bit to fit the thinner fork housing). I'm even using the same spacers and axle that I used with my 03 forks. Not sure about the rear shock I only messed with the front suspension since I was having such a hard time dialing in the 03 forks.
This forum topic has 4 replies.
TFerrell311 Liked a reply to forum topic Need help figuring out which triple clamps and wheel hubs will fit 2003 kx250
6/4/2020 8:35pm
Either remove the casting lines off the hubs and triple clamps or buy a modified steering stop from trick engineering to run newer forks off any 250f/450. You’d just need to run the newer wheel and spacers. I’m still running the original stopper he made for me years ago it works just like it should. 
This forum topic has 4 replies.
TFerrell311 Liked a reply to forum topic Need help figuring out which triple clamps and wheel hubs will fit 2003 kx250
6/4/2020 8:34pm
You'll have to run the front wheel not just the wheel spacers. i sent him my pc clamps to go off of but they work with the oem clamps from the 250fs also. The stop on the clamps are all the same. if you want to run the Kxf shock i believe it has to be lowered internally 3mm. Rachtech sells a spacer for that.
This forum topic has 4 replies.
racerdane Started a new thread Need help figuring out which triple clamps and wheel hubs will fit 2003 kx250
6/4/2020 8:40am Hey guys I'm going through my 03 kx250 and there are two things I'm having trouble with. Hubs and triple clamps. Hubs: I cracked both front and rear stock shoulderless rims. So I purchased new excel rims with the idea of lacing them up to my stock hubs. Well the stock hubs are ugly in my opinion so I'd like...
This forum thread has 4 replies.
racerdane Added a reply to Need help figuring out which triple clamps and wheel hubs will fit 2003 kx250
6/3/2020 2:53pm So I can run a newer kxf front end with my 03 wheel as long as I have the spacers for whatever front end I get? Also I was reading that stopper is designed to work with Pro Circuit clamps and might not work with stock or other aftermarket ones. Any word on that? Side question: will a newer kxf...