Lives in:
Dingmans Ferry , PA, USA
Member Since:
11/13/2023
Recent Activity
All
og434 Added a reply to 2024 Kawasaki KX450 and KX450X
4/2/2024 8:25am I had a set of ride engineering 21.5 clamps from my 22 I put on the 24. it was almost unrideable. Lost a lot stability and over steered really bad on corner entry. Really made me appreciate how good the new chassis is going back the the stock clamps.
More »
og434 Added a reply to 2024 Kawasaki KX450 and KX450X
11/15/2023 9:02am It's has all the same characteristics as the old frame but feels more nimble in the turns. The 24 can get into the inside lines way easier and still feels very stable in the straights. The ergo's feel very similar as well.
og434 Added a reply to 2024 Kawasaki KX450 and KX450X
11/14/2023 6:28pm I had to take the core out of the muffler. There's two rings spot welded to the core. I just pulled the wire screens off the rings with long needle nose pliers until all of it came off. Took about an hour to do. Hopefully twin air comes out with a nice filter and cage kit soon🙏
Brent Liked a reply to forum topic 2024 Kawasaki KX450 and KX450X
11/14/2023 11:12am
Kawi 450 intro setup @ glen Helen tomorrow.
This forum topic has 3179 replies.
og434 Added a reply to 2024 Kawasaki KX450 and KX450X
11/14/2023 4:52am 23 forks fit the front caliper bolts right up. The 24 triple clamps are the same part number/offset as the 23 too. The shock and linkage are completely different lengths.
og434 Added a reply to 2024 Kawasaki KX450 and KX450X
11/13/2023 6:00pm The filter can easily be distorted on the cage and causing it to have gaps around the sealing edge. It's super easy to access just needs a better quality foam filter.
og434 Added a reply to 2024 Kawasaki KX450 and KX450X
11/13/2023 1:42pm Up to 2.8 hours on the 2024. Things I've learned so far. 2018 acerbis plastic skid plate fits with trimming/modding. The exhaust has two separate wire screens in it that I removed and helps a lot with bottom end power. There's a rubber plug under the battery tray that can be removed to get more air to the air box...