Added reply in a thread CRF250 problem 11/29/2021 10:20 AM

The timing is spot on, checked several times

Added reply in a thread CRF250 problem 11/29/2021 7:42 AM

New fuel also in the tank and new air filter, ive done many engine rebuilds before but i have never had such strange problem

Started new thread CRF250 problem 11/29/2021 7:39 AM

Ok I got a 2006 CRF250 with a blown engine, changed the crankshaft, piston, cylinder, exhaust valves, spark plug, valve clearances are ok, the carb is like new inside and it has the stock jetting settings according to my location The bike is not starting

... more »

This forum thread has 9 replies

Added reply in a thread 01 RM250 7/14/2018 2:57 AM

One of the reasons i bought this bike was because i bought a new bike and i had to wait for it for 6 months ! To arrive in iceland, was going crazy and needed a bike to ride and didn’t find any RM for sale so i bought a 2001 KX250 and was suprised how

... more »
Added reply in a thread 01 RM250 7/14/2018 2:42 AM

Got some tyres for the new wheels

Still have to figure out the dent in the pipe... And it needed a new shift lever And a new brake pedal I’ve been looking for a set of frame guards to fit this bike but ... more »
Added reply in a thread 08 RM250 With RMZ Subframe 6/13/2018 2:55 PM

Looks sweet !

Added reply in a thread 01 RM250 6/10/2018 2:04 PM

This is starting to look like a bike again

Added reply in a thread 01 RM250 6/8/2018 1:35 PM

Added reply in a thread 01 RM250 6/8/2018 1:33 PM

New bearings, gaskets, seals, connecting rod and piston

... more »
Added reply in a thread 08 RM250 With RMZ Subframe 6/8/2018 12:53 PM

That’s really nice ! How much work was fitting the subframe ?

Added reply in a thread 2003 RM250 replica rebuild question... PHOTOS ADDED 6/8/2018 12:49 PM

I bought an 04 airbox for my 01 and the boot is bigger and rubbing the frame, probably best to get from the same model year

Added reply in a thread 01 RM250 6/1/2018 3:00 AM

Thanks ! It’s not that hard if you work your way up to 1200 grid or so and finish it with a scotch brite pad

Added reply in a thread 01 RM250 5/31/2018 4:33 PM

Got the rims today, just finished the rear wheel lacing and truing

... more »
Added reply in a thread 01 RM250 5/28/2018 10:40 AM

Black fork guards:

Planning on using a brake line from a newer model
Added reply in a thread 01 RM250 5/28/2018 10:35 AM

I found that the best way was to use an air sander with paper from 120-1200 and finish off with a scotchbrite by hand

Added reply in a thread 01 RM250 5/25/2018 1:45 PM

Since i will not be using this bike alot i ordered a set of cheap rims from “Pro Wheels” but as you can see in this picture i guess it’s better to spend a little more one time and get a good quality item:

Both boxes are marked with the same ... more »
Added reply in a thread 01 RM250 5/25/2018 1:35 PM

Thanks! I was going to do a replica but then i wanted different graphics so decided to use only the number

Added reply in a thread 01 RM250 5/25/2018 10:55 AM

Rear shock needed a rebuild, changed the shock head and bladder

Gave the shock body a little shine and sent the spring off to powdercoat Some parts : New plastics Graphics Another ... more »
Added reply in a thread 01 RM250 5/25/2018 10:40 AM

It took i think about 3-4 hours in total, almost ready ! The plan is to have a really good bike looking like new with small mods like rmz front end and aftermarket engine covers for example.

Started new thread 01 RM250 5/25/2018 6:58 AM

This is my first bike build, been wanting to do this for a long time now, i came across a 2001 RM250 about two months ago in really rough shape so i decided to tear it apart and start doing things my way.

... more »

This forum thread has 19 replies