Recent Activity
All
mrmoto619 Added a reply to Did Tyler Evans pass away?
9/17/2018 10:13am True story early 2000's my buddy and I are at Lake Elsinore and someone pulls in next to us in the pits. They were driving an all black lifted truck. Tyler gets out and says whats up. He puts down a flimsy ramp ( because his truck was lifted so high ) it was almost vertical to the ground. I...
More »
mrmoto619 Added a reply to Torn ACL - to repair or not?
2/5/2018 12:24pm Tore both ACLs both times tried to ride the problem is planting your foot caused the knee to pop out creating intense pain and swelling and limping for a few days this happened twice with the first acl then I got the surgery ( patellar tendon) and once with the second acl and then I got the surgery ( used...
mrmoto619 Added a reply to 4CS suspension fix
12/22/2017 11:42am I have the dal saggio sphere kit; it was about the same price as the brand new AER forks on ebay. I ride the FC 350 mx only and ride the tx 300 mx on occasion and woods. If you read the thread I told you about on KTMtalk there were some suspension guru's who noted that they have customers...
mrmoto619 Added a reply to 4CS suspension fix
12/22/2017 7:16am I have a 16 FC 350 and saw a pair of brand new AER forks on ebay. Before I bought them I started a thread on KTMtalk comparing the AER forks to the 4CS with Dal Soggio kit installed. The overall result of that thread was go with the 4CS with the Dal Soggio which I did and am very...
mrmoto619 Added a reply to ACL replacement and recovery
11/3/2017 10:55am Had Rt. ACL replaced 2011 used patellar tendon did my therapy went well except at the 3-4 month time frame you will start feeling much better and think you are able to do stuff your probably not ready for ( I jumped a bicycle into a foam pit and twisted my knee just a little but that caused intense pain...
mrmoto619 Started a new thread 1983 CR 125 shifting issue
5/15/2017 6:29am I have a 1983 CR 125 that when downshifting from 3rd to 2nd gear goes into neutral ( this happens about 25% of the time and seems to occur more frequently when riding on bumpy ground). Is this a common problem with this bike? I had someone tell me there was an issue with something in the transmission in this...
This forum thread has 4 replies.
mrmoto619 Added a reply to Usual help needed for 83 CR125
8/29/2016 11:36am Do you know of anybody who could make a replica of it?
mrmoto619 Added a reply to Usual help needed for 83 CR125
8/29/2016 6:36am
Inspection of my water pump gear showed several small cracks will be looking for a new one. Would you advise me not to continue use of this one until I find a new one?
mrmoto619 Added a reply to Usual help needed for 83 CR125
8/26/2016 1:06pm When I spin the gear or the propeller the clutch cover is off the bike. It does move but there is definite resistance. When I looked into the radiator there was one small piece of corrosion that I saw it was about 1/2 the size of a pea the other radiator I cant see inside obviously so how would I...
mrmoto619 Added a reply to Usual help needed for 83 CR125
8/17/2016 11:16am It runs now and does not leak but the previous owner used a ton of JB weld on it. The water pump propeller does not turn easily ( the bearings are fine) so I am assuming with all of the JB weld something is not shaped correctly. I do not know the long term consequences of running the bike like...
mrmoto619 Started a new thread Usual help needed for 83 CR125
8/17/2016 9:39am I have a 1983 CR 125 and the clutch case needs replacing I am trying to avoid the high priced reproductions; but have not seen any on ebay for the past several weeks. Are there any other years that will work for that bike I have only been searching 1983.
This forum thread has 17 replies.
mrmoto619 Added a reply to High Point MX tickets available
6/15/2016 1:46pm 94
mrmoto619 Started a new thread 06 kx 85 wont shift into 3rd
7/27/2014 6:45pm I have an 06 KX 85 that would not shift into 3rd gear I took it to a well respected mechanic who took it apart and said nothing really jumped out at him as being broken. He thought there might be a burr on the metal so he polished a few pieces put it back together and second ride same...
This forum thread has 7 replies.
mrmoto619 Started a new thread Jetting for 83 YZ 250
6/24/2013 1:32pm I just bought a new 38mm Mikuni carb and am looking for baseline setting for this bike I am at 1000 feet altitude. Thanks.
This forum thread has 0 replies.
mrmoto619 Started a new thread stock carb for 83 yz 250
4/30/2013 3:54am Does anybody know what size Mikuni carb came stock on a 1983 yz 250?
This forum thread has 2 replies.
mrmoto619 Added a reply to stock carb for 83 yz 250
4/30/2013 3:54am Thanks
mrmoto619 Added a reply to No wonder the WMA races don't get tv time.
6/10/2012 12:36pm I was also at the race. It was not boring at all: first moto JP went down in the first turn worked her way through the pack to second just a few feet short of first at the finish second moto first and second place (JP and TG)came together in a turn and both crashed right in front of me...
mrmoto619 Added a reply to ACL Post Surgery Questions and Advice
5/3/2012 7:28pm I had ACL surgery (patellar graph) five months ago. The pain in your knee right now will subside and before long make the stationary bike your best friend. At about three months you are going to feel like you can ride and do other things my advice is to resist your temptation I started riding at month three against my...
mrmoto619 Added a reply to Atlanta Supercross - Where to stay...
2/22/2012 6:33am Last year I stayed in Buckhead the best move I made was to take the Marta to the race and make a bee line for the station as soon as the race ended
mrmoto619 Added a reply to if indeed chad reed is busted up and out for the year
2/20/2012 8:14am I am 12 weeks post ACL repair surgery I am following the protocol of my surgeon and Aldon Baker ( who helped JS, RC, and IT through he same surgery) they both are in agreement that even though you feel like you could ride earlier the graft is not fully healed until 6 months. If it is a torn ACL...