All

finally got a bit of time to myself and found the cause of the problem, the bike came with a brand new piston kit when i bought it and as it was new i never questioned the quality of it, anyway i stripped the top end down and placed the ring inside the cylinder and held it up to the...

yes mate i put a FUCKING drill on the flywheel, spins the engine over faster, similar to a bump start, done it many a time before on bikes that are difficult to start, and respectfully i have rebuilt probably around 10 motorcross engines and one superbike engine and am a qualified car mechanic, i come on here for advice, not...

also it has carbon fibre reed valves, i think it says something like vforce on them, how do i know if they are ok?

yep, thats why i stripped the top end back off to check, its facing the exhaust, for some reason i really cant get it out of my head its the flywheel causing the timing to be thrown out because of it being rough, like someones had a pair of grips on it or something

well after leaving it for a couple days i went and got a new plug and tried again, even had a drill on the flywheel nut to get her spinning over quickly but still nothing atall, carb has been stripped 4 times now and is spotless, the need is set to the origional height, need to check the float as...

hello thanks for the advice, fuel is definatly getting through, took the exhaust off today and petrol poured out of it, spoken to my local 2 stroke specialist today and he seems to think basically ive flooded it by giving it throttle when im turning it over, he basically said as long as a 2 strokes got compression, fuel and...