Lives in:
Scunthorpe, GB
Member Since:
1/5/2026
Recent Activity
All
dansfx Liked a reply to forum topic HELP!! CRF450 CLUTCH ISSUE ??
1/7/2026 12:18pm
Check that the primary gear coming off the crank shaft is OK and the nut is tight. Also, pull the pressure plate off and check that the nut that holds inner and outer baskets on the transmission input shaft it tight. If all that's good check that the slave cylinder doesn't have some type of damage preventing the clutch from fully engaging.
This forum topic has 3 replies.
EAmato88 Liked a reply to forum topic HELP!! CRF450 CLUTCH ISSUE ??
1/7/2026 12:18pm
Remove all clutch plates. Count them. Check your count to the service manual or any online parts fiche. If you have the correct number of plates, measure them and compare to service limits printed in the manual or find online. If plates measure in spec, you have a transmission problem and need to disassemble. Good luck
This forum topic has 3 replies.
96motorhead Liked a reply to forum topic HELP!! CRF450 CLUTCH ISSUE ??
1/6/2026 1:01am
Make sure you aren't missing a clutch fiber/plate and the clutch is adjusted properly. If that isn't it then you will need to start pulling things apart.
This forum topic has 3 replies.
jonno91 Started a new thread HELP!! CRF450 CLUTCH ISSUE ??
1/5/2026 2:23pm Hi guys I’ve got a crf450 2003, basically it goes into all gears nice with no issues, the clutch feels good and is moving the pressure plate away from the basket as I’m thinking is what it should be doing. The Basket isn’t grooved and plates are all good, the issue is when I start the bike and put it...
This forum thread has 3 replies.