Recent Activity
All
JHipps835 Added a reply to 2018 CRF250R Dying Randomly
6/13/2021 7:35pm Okay thank you. how exactly would I fix that? Would it require me putting a new one in? Wouldnt it happen while riding too though if that were the cause?
More »
JHipps835 Started a new thread 2018 CRF250R Dying Randomly
6/13/2021 4:18pm So the last two times I have gone to the track I have noticed this. I have a 2018 CRF250R. It is just now coming up on 38 hours. I have done oil and air filter maintenance properly. On the first start up, the bike starts fine, but when I went to give it throttle to rev it up, it...
This forum thread has 3 replies.
JHipps835 Started a new thread Riding Technique Question
6/8/2021 7:57am I began riding this year in March on a 18' CRF250R. Ever since I began, I have experienced pain in my hands after just a few laps. I also get blisters on my palms right at the base of my fingers. I am not sure at this point if I am doing something wrong technique wise, or is it my...
This forum thread has 10 replies.
JHipps835 Started a new thread ‘18 CRF250R ECU REMAP QUESTION
4/26/2021 7:33pm Has anyone had new maps put onto their ECUs by a tuner? I recently had mine remapped because of an exhaust upgrade. I’m relatively new and when going through my tuners site I noticed that he mentioned something about TPS adjustments when remapping an ECU. Does that apply to my bike? How is that done if so
This forum thread has 0 replies.
JHipps835 Added a reply to 2022 CRF250R
4/24/2021 9:39am Sorry I didn’t mean updates, I meant just the general release of the new bikes. Like are both bikes released the same month each year or does say the 450 come out in May while the 250 comes out in June (examples)
JHipps835 Added a reply to 2022 CRF250R
4/24/2021 7:50am In previous years have the 250 and 450 been released at the same time or have they always been at different times?
JHipps835 Started a new thread Bike moving with clutch lever pulled in
4/15/2021 1:28pm So just installed a Hinson system into my bike. I started the bike up first time after, let it warm up some and pulled clutch in and it dies when clicked into first. I then let it warm up a little more, this time I pulled the clutch in, put it into first and the bike was accelerating on its...
This forum thread has 3 replies.
JHipps835 Started a new thread 2018 CRF250R Clutch Question
4/10/2021 6:00am So I’ve noticed lately that shifting has been getting tough on my bike. I’ve seen a lot of information online saying that it’s probably the basket being notched up. So my question is, is it okay for me to just put a Hinson basket/Hinson plates in, then leave everything else stock? My bike is completely stock, and i’m pretty new...
This forum thread has 0 replies.
moto455va Liked a reply to forum topic Bell MX-9 vs Moto 9
12/20/2020 8:49pm
Why do people still use this as a measure of quality? If the helmet breaks, that means it absorbed the impact, and not your head. If you go around wearing the hardest helmet you can find, that means the helmet is translating that impact directly into your head. Helmets are a one and done system. If you hit hard, it needs to be replaced.
This forum topic has 23 replies.
JHipps835 Started a new thread HUGE LOT! ILLINOIS ONLY. CRF250R/450R, Helmet, Boots, Suspension
11/29/2020 10:26am Selling everything here for local Illinois pick up ONLY. Selling the whole lot at $700. See this as an opportunity to make some money. Just need gone. DO NOT CONTACT ME UNLESS YOU ARE SERIOUS ABOUT BUYING. TEXT ME AT 8152452942 FOR FASTER RESPONSE -48mm Showa Spring Forks built by RaceTech with their Gold valves. Rear shock also built by...
This forum thread has 0 replies.
JHipps835 Started a new thread Alpinestars Tech 1 - Size 9
11/27/2020 12:48pm Worn for just half a season. Just breaking in so perfect for someone new. $100 plus shipping Text 8152452942 if interested 
This forum thread has 0 replies.
JHipps835 Started a new thread Showa RaceTech Gold Valve Suspension - IL PREFERRED
11/23/2020 6:49pm Both forks and rear spring were all built by RaceTech. Came off 2014 Honda CRF250R The forks are gold valved and work fine. They are 48MM SHOWA SPRING FORKS. Rear shock is Showa as well. These will fit other bikes not just a CRF250R. They are currently off the bike stored in room temperature. Looking for $800 plus shipping. Illinois...
This forum thread has 0 replies.
JHipps835 Started a new thread D.I.D Dirtstar ST-X Wheel Set.
11/9/2020 12:55pm 21” Front Wheel with Dunlop Geomax Mx51 19” Rear Wheel with Dunlop Geomax MX51 Red TCR Hubs $600 These wheels may as well be brand new. I am not even sure they have ever been ridden on. They are top of the line wheels and look amazing. These were purchased for a 2014 Honda CRF250R but I know they will...
This forum thread has 10 replies.
JHipps835 Added a reply to D.I.D Dirtstar ST-X Wheel Set.
11/9/2020 12:55pm The site shows the rim itself will fit but would require your spokes possible hubs, would be my guess 
JHipps835 Added a reply to D.I.D Dirtstar ST-X Wheel Set.
11/9/2020 12:45pm That is something I am not sure about. You would have to research that
JHipps835 Added a reply to D.I.D Dirtstar ST-X Wheel Set.
11/9/2020 10:53am Sounds good to me
JHipps835 Added a reply to Fresh Showa Racetech Gold Valved Forks and Spring
11/8/2020 5:05pm Nope, they did not. Buyer canceled because he thought fork guards were included...
JHipps835 Started a new thread Fresh Showa Racetech Gold Valved Forks and Spring
11/7/2020 7:55pm Had this built and barely got to ride on it this year. This set came off a 2014 CRF250R but they will fit other bikes of course, they are 48mm. Comes with triple clamps as well. Any questions just text me at 1 (815) 245-2942, I don’t check my messages on here, text is much faster. Serious Inquiries only please...
This forum thread has 3 replies.
JHipps835 Added a reply to D.I.D Dirtstar ST-X Wheel Set.
11/6/2020 7:20pm I didn’t no
JHipps835 Started a new thread CRF250R 14-17 FMF F4.1 Blue Titanium with MegaBomb Header
11/5/2020 8:46pm I sold my bike so I no longer need this exhaust. Retail on this exhaust with header is $800. No leaks on it. If interested please text me at 1 (815) 245-2942 and I can get better pictures. It is no longer on the bike 
This forum thread has 0 replies.