Recent Activity
All
GeoffB33 Added a reply to 2019 KTM 150SX just won’t run. Any help would be much appreciated.
4/23/2023 4:23pm Thanks mate. Appreciate the feedback. I’ve done a fair bit of process of elimination stuff after putting the bike back to complete stock form and it still ran awful. I’ve changed all the basic stuff around but it hasn’t worked so I’m just looking for other issues out there that I may have never heard of myself.
More »
GeoffB33 Added a reply to 2019 KTM 150SX just won’t run. Any help would be much appreciated.
4/23/2023 4:20pm I can confirm after questioning myself all night that I did indeed put the piston in the correct way. I’ll check the transmission oil next.
GeoffB33 Added a reply to 2019 KTM 150SX just won’t run. Any help would be much appreciated.
4/23/2023 6:39am Bought it with the stock mikuni and played around a little bit with that. Same thing with the power. Then bought a Keihen as I’ve been told they’re more predictable and are just easier to live with than the Mikuni but unfortunately, both carbs regardless of their jetting, the bike just has absolutely no mid to top end power. It...
GeoffB33 Added a reply to 2019 KTM 150SX just won’t run. Any help would be much appreciated.
4/23/2023 6:06am Keihen Pwk 38. Either N1EF or N0ZF needle tried on both 3rd or 4th clip, tried 45 and 48 pilot and 180 main air screw 1.5-1.75 out. I also had the stock Mikuni set up in there as well and it did the same thing. Like i said, nothing seems to change how rich it runs regardless of the jetting...
GeoffB33 Added a reply to 2019 KTM 150SX just won’t run. Any help would be much appreciated.
4/23/2023 5:53am I’ve done that and it seems to be working decent after I cleaned it all. The bike revs slower than a tpi it’s just awful
GeoffB33 Added a reply to 2019 KTM 150SX just won’t run. Any help would be much appreciated.
4/23/2023 5:48am Any suggestions for making it not so sticky?
GeoffB33 Started a new thread 2019 KTM 150SX just won’t run. Any help would be much appreciated.
4/23/2023 5:08am Hi guys. I just bought myself a second hand 2019 150SX as a project build and it’s had a bit of a tough life. I’ve only ridden it a few times just to feel it out before throwing a bunch of money at it and I’ve discovered that something is very wrong with the motor and I can’t figure out...
This forum thread has 33 replies.
GeoffB33 Started a new thread 1995 CR250 brake problems
3/17/2019 4:07am Hi guys. Ground up rebuild of my 1995 CR250 and obviously I’m finding the brakes just aren’t good enough. I’ve replaced the stock 95 front end with a 2012 CRF front end with clamps, forks, caliper and all that jazz and that has made a huge difference. The rear brake is a bit more complex, I’ve fitted braided lines at...
This forum thread has 2 replies.
GeoffB33 Started a new thread Brembo brakes on a Honda?!
11/15/2018 5:45pm I’ve recently bought a CRF front end for my CR250 project and I want to put my Brembo front master cylinder, line and caliber on it. Has anyone ever mounted a Brembo front brake setup on a CRF? Any help would be much appreciated.
This forum thread has 5 replies.
GeoffB33 Started a new thread 95 Honda CR250 forks and clamp swap
5/15/2018 6:55pm Just bought a 95 CR250 and looking to get some newer forks and clamps for it. What are my options? I’ve heard that you have to do a few tricks to make any of the newer forks to fit. I’d be happy to keep the stock forks but I have found the stock triple clamp has the bars sitting in...
This forum thread has 27 replies.
GeoffB33 Added a reply to 95 Honda CR250 forks and clamp swap
5/13/2018 1:30pm Thanks legends for the info. I will keep searching then!
GeoffB33 Added a reply to 95 Honda CR250 forks and clamp swap
5/13/2018 12:41am Thanks everyone. So I have an option of using a set of 2016 YZ450 forks and clamps. Will the all balls kit work with them? I don’t quite understand how it works. Waiting to hear back from all balls as well but if you boys know about them then let me know. Thanks again. GB