Posts: 5
Joined: 5/10/2018
Location: AUS
I’ve recently bought a CRF front end for my CR250 project and I want to put my Brembo front master cylinder, line and caliber on it. Has anyone ever mounted a Brembo front brake setup on a CRF? Any help would be much appreciated.
Posts: 1138
Joined: 5/6/2009
Location: Coventry, GBR
Geico ran Master cylinders for a few years; that's the easy bit. You'll need a custom caliper mount to run the caliper and i'm not sure anyone sells one.
Eleven10 Mods team ran Brembo SXS front and rear calipers etc years ago, but they ran on custom billet carriers.
Good luck, cool mod to make!
www.90smotocross.com
Instagram - @90sMotocross
Facebook - 90s Motocross
Posts: 3220
Joined: 4/15/2013
Location: Suffolk, VA USA
Get in touch with Trick Engineering
I put brembo on my KX500. Anything is possible. I fabricated my setup, but I have seen Trick Eng on instagram posting custom brackets made to fit brembos
Posts: 123
Joined: 10/26/2014
Location: Santa Clarita, CA USA
Markee wrote:
Get in touch with Trick Engineering
I put brembo on my KX500. Anything is possible. I fabricated my setup, but I have seen Trick Eng on instagram posting custom brackets made to fit brembos
This is the custom bracket that Trick Eng made for my 89 cr125. It was made specifically for a brembo caliper.
Posts: 1850
Joined: 3/4/2013
Location: Pink Hill, NC USA
Markee wrote:
Get in touch with Trick Engineering
I put brembo on my KX500. Anything is possible. I fabricated my setup, but I have seen Trick Eng on instagram posting custom brackets made to fit brembosJMX247 wrote:
This is the custom bracket that Trick Eng made for my 89 cr125. It was made specifically for a brembo caliper.
How much did he charge? And did you have to provide dimensions? I have a complete brembo system I want to put on my yz
Posts: 123
Joined: 10/26/2014
Location: Santa Clarita, CA USA
Zesiger 112 wrote:
How much did he charge? And did you have to provide dimensions? I have a complete brembo system I want to put on my yz
I provided the fork legs, the hub with oversized disc and the brembo caliper. Clayton did all the demensions and work.
