1995 CR250 brake problems

GeoffB33
Profile picture for user GeoffB33
Posts
15
Joined
5/10/2018
Location
AU
GeoffB33
Hi guys. Ground up rebuild of my 1995 CR250 and obviously I’m finding the brakes just aren’t good enough. I’ve replaced the stock 95 front end with a 2012 CRF front end with clamps, forks, caliper and all that jazz and that has made a huge difference. The rear brake is a bit more complex, I’ve fitted braided lines at both ends but I can’t seem to find a set of brake pads that lasts or simply fall apart. Question is. Is there any other caliper options for a 95 CR250? Crf? Newer CR250? Aftermarket? Any help would be of help. Cheers guys. GB
|
689
Profile picture for user 689
Posts
803
Joined
12/10/2010
Location
AU
689 3/17/2019 2:40pm
3/17/2019 2:40pm
Check out the facebook page ' CR250's 92-96 and CR125's 93-97' few guys on there have upgraded the rear brake systems.

thereal87
Profile picture for user thereal87
Posts
141
Joined
8/2/2016
Location
Sunshine Coast AU
thereal87 3/18/2019 5:53am
3/18/2019 5:53am
Hey man, from my understanding if you get the rear caliper bracket off a 97/99 cr you can run the bigger later model rear rotor, and I’ve seen a few people put crf master cylinders on which eliminates the poxy remote resivor master cylinder. Surely performance would be better to. Hope this helps

Post a reply to: 1995 CR250 brake problems