factoryRB

Member Summary

Forum topics started: 6

Forum replies: 34

Lives in:

Member Since:

7/21/2016

Recent Activity

Filter:

All

factoryRB Started a new thread Vortex ecu CRF450R 2017-18

1/25/2022 11:54pm

Hi there, i have one used crf450r vortex ecu left for sale. Will fit 2017-2018 honda crf450r $500 usd shipped worldwide Email parts@rbbikes.nz

This forum thread has 0 replies.

factoryRB Added a reply to ISO CRF250R '18-'21 Vortex Ignition & parts

12/31/2021 5:05pm

Pretty sure I still have one, pm me

factoryRB Started a new thread 2019 CRF450r 2 stroke “New Zealand “

7/2/2021 2:05am

Hello from the bottom of the world! I’ve recently started up a little motorcycle business (RB Bikes check us out on FB ) in New Zealand and thought no better way to showcase my work than by building a 2 stroke conversion! I’ve built a few bikes in the past (mainly honda’s)

This one is a 2012 CRF250R, 2001...

This forum thread has 6 replies.

factoryRB Added a reply to 2019 CRF450r 2 stroke “New Zealand “

7/2/2021 2:05am

Exciting times!! Frame has been cut !!

I’ve decided to try and see if the bottom cradle out of the 2001 CR250 would be able to fit in place rather than fab up something and not have it look stock , like it was supposed to be from the factory

You can see how much...

factoryRB Added a reply to 2019 CRF450r 2 stroke “New Zealand “

6/20/2021 2:10am

It’s been a while, will be cutting / welding the frame this week with an local engineering company !! Fits in the oem Frame but just doesn’t work.

So will need to cut the frame a lot to raise the “Y”, make some spacers for the swing arm, and hopefully we get the engine sitting correctly...

factoryRB Added a reply to 2019 CRF450r 2 stroke “New Zealand “

5/27/2021 11:18pm

So got the engine bolt pack, and it’s different to the one I got a few years ago 🤦🏻‍♂️ They’re changed the style of bolts , that don’t look oem. Not that happy but will still use them

factoryRB Added a reply to 2019 CRF450r 2 stroke “New Zealand “

5/26/2021 1:22am

Engine has been at the vapour blasters and is ready to pick up !!

I have ordered a “bolt” engine bolt kit which should turn up tomorrow, still have to order new head and cylinder studs

factoryRB Started a new thread AMA jerseys Tomac and Barcia

5/22/2020 10:42pm

Selling a Barcia shirt (signed)

Tomac jersey and pants

Looking for offers Will ship world wide Pm your offers thanks

This forum thread has 2 replies.

factoryRB Added a reply to AMA jerseys Tomac and Barcia

5/21/2020 9:43pm

Richard.beuck@gmail.com

factoryRB Started a new thread CR250 kiwi edition

8/24/2019 1:54am

Hey guys, Have just picked up a 2003 CR250 that needs the treatment ? it’ll be a bit of a slow build as I will ride it for the next few months while summer is here then strip it and start again. Should end up pretty nice, have Akit shock, some B kit forks and some hrc stuff

Bikes...

This forum thread has 23 replies.

factoryRB Added a reply to CR250 kiwi edition

8/15/2019 10:52pm

Gave the carb an overhaul and new vent hoses, Fluor green/ yellow not my favourite colour but it was what I could get at the time

factoryRB Added a reply to CR250 kiwi edition

8/10/2019 5:38pm

Will be using Bridgestone tyres, that’s what I sell! Will be using the X20 series front and rear, with a 110/90-19 rear, stock size but is my preferred tyre size for this chassis. New hardware to mount the discs and sprocket aswell

I’m pretty impressed with the new range from bolt hardware, very comprehensive and priced right. Couldn’t...

factoryRB Added a reply to CR250 kiwi edition

8/9/2019 8:16pm

Have got the A-Kit shock built, new black DLC shaft to match the forks, and valved to a spec to suit me, spring rate is stock so should be good

I place I work at is the importer for R.K chains, so on goes a R.K MXZ race chain and sprockets we have made. Since I’ve been paying for...

factoryRB Added a reply to CR250 kiwi edition

8/9/2019 1:53am

Been busy with work, releasing 2020 FLY into stores across the country😍 so been a bit a slack on the updates Have got the engine back in the frame, bolted up

Pulled the linkage bearings out and they were toast! The lower shock bearing had one seal in the wrong way and was so seized that I couldn’t press...

factoryRB Added a reply to CR250 kiwi edition

7/26/2019 1:23pm

I cleaned up the frame,radiators and engine yesterday, I tired soda blasting the engine and radiators but found I didn’t like the results and took way to long🤷🏻‍♂️ So hot water blaster, mild acid and scotch brite was the way. It’s not prefect but Came up miles better than before, plus took me less than an hour to do them...

factoryRB Added a reply to CR250 kiwi edition

7/26/2019 1:15pm

Loch- shock is A-kit and built to length for the CR250, forks came from Showa through a Japanese rider that came to New Zealand. Motor has had a new cylinder , 07 base gasket to lower port timing,pro circuit works pipe and Ti-2 muffler, jetted. Will be getting the squish and porting done soonish. Will get it back together and...

factoryRB Added a reply to CR250 kiwi edition

7/25/2019 3:27am

Time to get started! It’s the middle of winter here in New Zealand so have started to pull the bike done and get to work cleaning the frame,engine etc

The frame has some sort of oxidation on it which is going to be painful to remove 🤦🏻‍♂️ Planing on using a hot water blaster, a mild acid...

JM485 Liked a reply to forum topic It was matter of time.. Pala Monster Jump

7/15/2019 12:38am

Lol “pala must do something”, give me a break dude not all of us want a nani holding ours hands through life. We’ve already got the government regulating the living hell out of everything, the last thing anyone needs is more rules riding your dirtbike. Dude went for it on an 06 crf450, much respect for that send!

This forum topic has 194 replies.