Recent Activity
All
dalonzo96 Added a reply to Lost on direction to go with AER forks
4/22/2022 6:31pm I have some experience with a revalved Aer and spring conversion that I could share to help you with your decision. First bike I sent my 2018 350 Aer forks to Kreft Moto and they added the revalve controls and micro polished lowers. The forks were defiantly better with a big range of adjustability but still did not give a...
More »
dalonzo96 Added a reply to Kreft moto vs lucky cartridges
1/8/2021 4:58pm I had my 2018 350 SXF done by Kreft with revalve control and it was a significant improvement over stock. I was able to set it up for various types of riding but took awhile to get all my settings down. This past season I installed a set of MX Tech Lucky Carbons in my 2020 300xc. Told them I...
dalonzo96 Started a new thread WP AER to Xact
1/7/2021 4:17pm Hi, I have a 2020 300xc that I pulled the cartridges out of and installed the MX Tech Lucky kit into. I just purchased a 2018 350sxf for track days and after bringing it home I noticed it has a leaky fork seal. Since I’m going to be pulling the fork apart I was going to install a MX Tech...
This forum thread has 1 reply.
dalonzo96 Added a reply to Anyone done the Idle Screw Mod on a KTM 300 TPI?
1/7/2021 4:00pm After about 10h I installed the idle adjust screw on my 2020 300xc. Have put about 50h on it since and it defiantly is nice to raise the idle a bit when doing technical stuff. Also it improved the throttle response after I adjusted the air screw almost all the way in and raised the idle to compensate. If you...
dalonzo96 Added a reply to AER Suspension Options
8/30/2020 4:51pm How big of a difference do you feel from the stock AER to the Lucky Gen 1 kit? Have you gotten out to try out the SKF glide kit and Mid Valve yet?
dalonzo96 Added a reply to 48mm cone valves and traxx shock
8/28/2020 8:32pm Willing to separate the forks?
dalonzo96 Added a reply to 48mm Cone valve forks and Ohlins RXF forks KTM/Husqvarna
8/27/2020 7:48am Interested in the Cone Valves sent you a PM
dalonzo96 Added a reply to AER Suspension Options
8/27/2020 6:35am I’ve tried air pressures in the fork from 120psi to 155psi with the most compliant being with the fork set to its factory 139psi for woods and 145psi for MX. The first option is a full revalve from a local tuner that is a MXT dealer that recommended the Leaf Spring Midvalve. But he is really pushing for the Lucky...
dalonzo96 Started a new thread AER Suspension Options
8/26/2020 7:55pm First time posting and having a hard time deciding on what direction to go with the forks on my 2020 KTM 300 XC. Have a couple options I narrowed it down to and wanting to get some feed back from people with experience. Also open to other suggestions. I weigh 175lbs race Novice C for XC and Enduros races. I...
This forum thread has 15 replies.
dalonzo96 Added a reply to Mx Tech Lucky converted spring forks KTM 2016-2020
8/2/2020 4:53pm Do you also still have the shock?
dalonzo96 Added a reply to Mx Tech A48R kit and AER Spring leaf Mid Valve kit
8/1/2020 3:39pm Are you willing to ship to Canada?