bronc3

Member Summary

Followers: 1

Following: 1

Forum topics started: 3

Forum replies: 61

Lives in:

Vero Beach, FL, USA

Member Since:

8/27/2012

Recent Activity

Filter:

All

bronc3 Started a new thread 1984 CR tank graphics

11/17/2013 2:56pm

Are there any tank graphics that will last at all on a plastic tank? Not looking for full graphics, just the Honda wing for my 84 CR. What did Honda use?

This forum thread has 9 replies.

bronc3 Added a reply to 1984 CR tank graphics

11/16/2013 8:28pm

Thanks guys. I though the originals lasted a long time, someone has to make something comparable.

bronc3 Added a reply to 1984 CR tank graphics

11/15/2013 2:12am

Tried a Fleabay set and a set from VMX, Lasted 10 minutes,

bronc3 Added a reply to 1984 CR tank graphics

11/15/2013 2:11am

500

bronc3 Started a new thread 74 CR125M guy

2/24/2013 4:23pm

Wanted to introduce myself as a new member. I've been active on several other forums for a long time, and have been a long time lurker here. I am currently putting an old Elsinore together for vintage MX and HS, but also race a modern bike in MX and HS, as do my wife, son and daughter. I may need...

This forum thread has 56 replies.

bronc3 Added a reply to 74 CR125M guy

2/24/2013 4:24pm

The race was on the Brighton Indian Reservation on the west side of Lake Okeechobee, and it was race #9 in the 2013 FTR hare scramble series. This one was actually our club's race. We go to Dade City in a few weeks, but I will probably race modern in that one. We have a local 14 race MX series...

bronc3 Added a reply to 74 CR125M guy

2/19/2013 5:24pm

Finally raced a 1.5 hour hare scramble on the CR, Fun but painful.

Bike did great, but needs rear shocks.

bronc3 Added a reply to yz250 year OLD SCHOOL

1/1/2013 4:51pm

Check the 10th digit of the VIN# : 1980 = A 1981 = B 1982 = C 1983 = D 1984 = E 1985 = F 1986 = G 1987 = H 1988 = J 1989 = K 1990 = L 1991 = M 1992 = N 1993 = P 1994 = R 1995 = S 1996 = T 1997...

bronc3 Added a reply to 74 CR125M guy

12/31/2012 6:29am

Bike is running again, had a bad CDI and the coil was on its way out too.

bronc3 Added a reply to 74 CR125M guy

12/20/2012 6:37pm

I've checked everything thoroughly and am fairly certain the CDI is bad. Parts are coming, so we'll find out if I'm right. There are some outstanding people in the vintage community, for sure.

bronc3 Added a reply to 74 CR125M guy

12/18/2012 6:36pm

Cool pictures! The countersprocket looks better than the one I just replaced on my bike. I shot a message to Joe and it sounds like he will be able to help me with parts. He doesn't have OEM specs as he runs PVLs on his bikes. Do you know/remember any of the ignition specs for this bike? My service manual...

bronc3 Added a reply to 74 CR125M guy

12/17/2012 7:43pm

Got the pipe on the bike and the bike ran fantastic. Now I have to deal with an ignition problem.

bronc3 Added a reply to 74 CR125M guy

11/22/2012 9:09am

Pre-dented pipe on the way. The original is too nice to trash.

bronc3 Added a reply to 74 CR125M guy

11/8/2012 8:20pm

http://www.youtube.com/watch?v=L2hWM6bK37w&feature=plcp

bronc3 Added a reply to 74 CR125M guy

11/8/2012 8:19pm

Not the best vid, but last weekend: http://www.youtube.com/watch?v=L2hWM6bK37w&feature=plcp Gotta turn the volume up.

bronc3 Added a reply to 74 CR125M guy

11/8/2012 8:09pm

1st overall, despite the chain. I threw a cheap new chain on it to get by until the new gearing arrives. The "new" pipe should be here in a few days also. We are loaded for a race in Bartow this weekend, but I don't think we will make it in time for me to race vintage. Bringing the CR...

bronc3 Added a reply to 74 CR125M guy

11/5/2012 4:43pm

40 miles in the woods this weekend on the CR, trying to figure out fuel consumption for hare scrambles. The bike ran like a champ and handled far better than I expected. Puts a smile on my face every time it comes on the pipe, which means I am smiling constantly while riding it.