Recent Activity
All
Blake_Toms Added a reply to Getting a hair more power out of a 2018 kx250f
5/21/2019 9:00pm I run 110 because it’s cheap and clean, I get it wholesale. I ordered a pipe but there’s no where that can dyno tune within 200 miles of me so Tokyo mods it will have to be
More »
Blake_Toms Started a new thread Help choosing new bar bend 2018 kx250f
12/5/2018 6:59pm Any kx250f owners find the stock bars awkward to stand up and ride with? I just can’t get comfortable standing on this bike, it like the wrists are “linked” when standing. I’m 5’9 and the stock bars look like they are actually taller than most other bends so I’m not sure.should I try less sweep or a higher bar? Just...
This forum thread has 5 replies.
Blake_Toms Added a reply to 2018 KX250F shutting down
12/4/2018 9:39am I used quantum, fit perfect
Blake_Toms Added a reply to 2018 KX250F shutting down
12/2/2018 7:38pm I had to put a fuel pump in my 2018 kx250f the other day, somehow I got trash in the tank and it sucked it up, but mine was not doing exactly this, it was just bogging when the bike got hot
Blake_Toms Started a new thread 2018 kx250f bogging and backfiring after a few laps
11/29/2018 9:52pm I have had nothing but headache with this bike, this was happening before I got my bike remapped so I can rule that out. 12 hours on bike, starts easy, runs amazing for about 4 laps, then it won’t rev up, just bogs....it was 65 degrees today, water pump working great. Right before the bogging starts it will backfire a...
This forum thread has 19 replies.
Blake_Toms Added a reply to 2018 kx250f bogging and backfiring after a few laps
11/27/2018 8:31am I heated it up carefully and squeezed it with pliers and it held, once it goes back in the housing the kinda supports it too, may ride it this weekend on that pump depending on if the new one comes in
Blake_Toms Added a reply to 2018 kx250f bogging and backfiring after a few laps
11/27/2018 8:28am I heated it up carefully and squeezed it with pliers and it held, once it goes back in the housing the kinda supports it too, may ride it this weekend on that pump depending on if the new one comes in
Blake_Toms Added a reply to 2018 kx250f bogging and backfiring after a few laps
11/27/2018 7:53am Wow those quantum pumps are cheap, at that price I’ll buy one anyways because I don’t feel like coming up short on a 100ft triple again ...
Blake_Toms Added a reply to 2018 kx250f bogging and backfiring after a few laps
11/27/2018 6:43am They go back together super easy, not sure why you would think they don’t, a couple different threads on here show this process
Blake_Toms Added a reply to 2018 kx250f bogging and backfiring after a few laps
11/26/2018 10:05pm Also, I will try and set tps when I out back together, which wire is which on the tps? I have black yellow and blue. I replace the torx head with a 8mm so I can adjust on bike
Blake_Toms Added a reply to 2018 kx250f bogging and backfiring after a few laps
11/26/2018 10:02pm
Well I took the tank off today and the filter looked pretty dirty, and the tank had debris in it, cleaned everything up, even the injectors. What do y’all think? 
Blake_Toms Added a reply to 2018 kx250f lean pop, who can re map? Options?
6/26/2018 2:50pm Thanks fellas I will be trying the tps tonight and will update
Blake_Toms Added a reply to 2018 kx250f lean pop, who can re map? Options?
6/23/2018 4:50pm Is this somthing I can do myself? My local dealer does not have good technicians, had no clue what I was talking about
Blake_Toms Added a reply to 2018 kx250f lean pop, who can re map? Options?
6/20/2018 7:39pm no, how would that help?
Blake_Toms Started a new thread 2018 kx250f lean pop, who can re map? Options?
6/20/2018 2:13pm I just bought a new kx250f and it's pops horribly on deceleration. I obviously don't wanna buy the 700$ calibration tool, no dealer I have called has it. Is there a way to maybe send the ecu to somewhere or ??? Bike is bone stock...so disapointed that it comes from the factory this way.
This forum thread has 18 replies.
Blake_Toms Started a new thread Help me pick a 2018 250f....
5/14/2018 11:22pm I'm a novice speed rider coming from a 250 2 stroke I've been on for the last 3 years. I've decided to stop racing woods and just ride mx for fun, so I'm going to try a 4 stroke. I haven't had a thumper since my 2007 crf which was junk... I'm not really interested in the suzuki because of...
This forum thread has 20 replies.
Blake_Toms Started a new thread 2006 RM 250 for sale
5/8/2018 5:15am
Text 3187878304
This forum thread has 0 replies.
Blake_Toms Started a new thread 2006 rm250 wheels and hubs...
4/23/2018 9:05pm So my yellow rear wheel on my 06 ricky edition rm250 cracked, and i cannot find ANYONE who makes a yellow wheel or even an after market hub. Will any other wheels fit this bike?
This forum thread has 4 replies.