Recent Activity
All
Batjustin Added a reply to PW50 disappointment
5/27/2025 6:01am Easy way to diagnose if this is your issue. Take the exhaust off and run it around the yard. You will be able to tell pretty quickly if the plugged exhaust is your issue. I am betting it is.
More »
Batjustin Added a reply to PW50 disappointment
5/27/2025 5:53am I had the exact same problems. My son would get stuck going uphill no power. I tried everything and then I found the real problem. The packing in the end of the pipe is soaked with oil causing heavy restriction, push it out and discard, the bike now rips!
Batjustin Added a reply to Kudos MAVTV
6/4/2022 4:42pm What a joke. Streaming service is complete crap.
Batjustin Started a new thread 2021.5 Rockstar Edition 10mm
1/28/2021 12:13pm Can someone shed some light on the question whether or not the new Rockstar Edition shares the same 10mm lower set up that the 21 production model has. The specs in the manual show a 10mm longer fork than the 21 so that suggests it does not. Looking for verification and reasonable explanation of why they wouldn't have their latest...
This forum thread has 27 replies.
Batjustin Added a reply to PW50 Issue
1/2/2021 5:52am x2 exhaust gets plugged up. Easy test, take exhaust off see if it solves the issue.
Batjustin Added a reply to KTM 450 to 350
6/13/2019 4:42am I currently have both. 2016.5 450FE and 2019 350. Unless you can ride the 350 aggressive the whole motto you will lose a lot of ground to the 450. 450 easier to go fast longer in my opinion (need more strength) 350 less strength more lung capacity (when your gassed harder to go fast) Both good bikes but my 2...
Batjustin Added a reply to PW 50 help
5/20/2019 10:42am Not trying to beat a dead horse but there was an oil soaked piece of packing lodged in the pipe that needs to be removed. I would almost guarantee this is your problem. Take the whole pipe off and use something to clean out the obstruction(packing).
Batjustin Added a reply to PW 50 help
5/20/2019 8:56am It may have been in the pipe and not in the muffler. Its been awhile. My sons bike was the same exact way until I got rid of the packing.
Batjustin Added a reply to PW 50 help
5/20/2019 8:52am It was like a completely different bike after that. Ran great. Mine was a 2014.
Batjustin Added a reply to PW 50 help
5/20/2019 8:51am I actually had packing lodged in the pipe. See if you can run a coat hanger or something through the entire pipe.
Batjustin Added a reply to PW 50 help
5/20/2019 4:12am Take the reducer washer out where the header pipe and the engine meet. I also found the packing material thats in the muffler got saturated causing the problem you describe. Once gone bike runs perfect. You have to push it out and leave it out.