1989 CR250 - wider pegs options?

PTshox wrote:

Looking to setup a 1989 CR250 honda with wider pegs... does anyone know if there is a later model wider OEM peg that will fit? Even...

Looking to setup a 1989 CR250 honda with wider pegs... does anyone know if there is a later model wider OEM peg that will fit? Even if it requires a little grinding? 

Txs,

 

JMX247 wrote:

Last2Stroke wrote:

Nice bike, can you post more pics?

PTshox wrote:

What year range on the YZ pegs? 

PTshox wrote:

What year range on the YZ pegs? 

JMX247 wrote:

Any from the last 15 or 20 years probably. I think the pegs on my Honda are from 2014, they have had the same design for...

Any from the last 15 or 20 years probably. I think the pegs on my Honda are from 2014, they have had the same design for many years. 

FGR01 wrote:

There are differences in the height, width, and material depending on what year/model they come from.   You want the cast stainless ones, not the cast...

There are differences in the height, width, and material depending on what year/model they come from.   You want the cast stainless ones, not the cast titanium ones or the older steel ones.   The ones pictured on your bike are the wider cast stainless ones.  Even within those, there are height differences between the 450F, 250F, and newer 2-strokes.   A little googling will find the differences.  I think there's a few threads on here and Thumpertalk.

FGR01 wrote:

There are differences in the height, width, and material depending on what year/model they come from.   You want the cast stainless ones, not the cast...

There are differences in the height, width, and material depending on what year/model they come from.   You want the cast stainless ones, not the cast titanium ones or the older steel ones.   The ones pictured on your bike are the wider cast stainless ones.  Even within those, there are height differences between the 450F, 250F, and newer 2-strokes.   A little googling will find the differences.  I think there's a few threads on here and Thumpertalk.

JMX247 wrote:

OP can use either the stainless or tatanium Yz pegs, they both work. I have used both Oem yz 4-stroke pegs and 2-stroke pegs of multiple...

OP can use either the stainless or tatanium Yz pegs, they both work. I have used both Oem yz 4-stroke pegs and 2-stroke pegs of multiple years and even some aftermarket sharp titanium pegs on all my Hondas from the 80’s and 90’s. So they should all mount fine regardless of year or model YZ.