2002 RM 250 Loom

callumshepherdson

Can anyone tell me what is supposed to plug into the green plug on the look as pictured below, I believe everything is plugged in except the kill switch and I’m unsure on what is supposed to go in there/ what I’m missing. TIAIMG 5773

|
dang472
Profile picture for user dang472
Posts
605
Joined
6/26/2014
Location
Kingston, IL US
Fantasy
266th
dang472 1/1/2025 11:10am
1/1/2025 11:10am

If it’s just a 2 wire plug and you have the coil plugged in, it should be the kill switch spot.

callumshepherdson 1/1/2025 11:43am
1/1/2025 11:43am
dang472 wrote:

If it’s just a 2 wire plug and you have the coil plugged in, it should be the kill switch spot.

The kill switch is grey, this is an additional plug

40acres
Profile picture for user 40acres
Posts
806
Joined
7/23/2017
Location
Houston, TX US
40acres 1/1/2025 12:25pm
1/1/2025 12:25pm

I believe the service manual has a wiring diagram towards the back. Should be able to trace it. 

dang472
Profile picture for user dang472
Posts
605
Joined
6/26/2014
Location
Kingston, IL US
Fantasy
266th
dang472 1/1/2025 1:32pm
1/1/2025 1:32pm

Did the 2002 come with a power jet or TPS carb? There’s a carb on eBay that is listed for a 2002 that has a 2 wire black plug coming off of it.

The Shop

See All »
callumshepherdson 1/1/2025 2:15pm
1/1/2025 2:15pm
dang472 wrote:
Did the 2002 come with a power jet or TPS carb? There’s a carb on eBay that is listed for a 2002 that has a 2...

Did the 2002 come with a power jet or TPS carb? There’s a carb on eBay that is listed for a 2002 that has a 2 wire black plug coming off of it.

I have 1 going to the cdi 2 wires going to the carb and then 4 at the front. 1 goes to the stator, 1 goes to the kill switch, 1 goes to the cool and I have 1 spare, which is the green I am questioning?

Last2Stroke 1/1/2025 2:17pm
1/1/2025 2:17pm

The wiring diagram for the 2003 shows a plug for the carburetor solenoid (power jet)...

image 901.png?VersionId=Z8v40qapZyR7L7jplZBFk8EmvUyAET
1

Post a reply to: 2002 RM 250 Loom