Starting a second 23 Kx450SR build

Put the ti pegs and pins on today

Added some Acerbis frame guards

These are next up and a set of ti footpeg mounts I’m grabbing from Factory Dick

I already have the shock bolts and subframe Ti bits on it 

A bit of an upgrade came in

Extened Tip for size 12 boots

Today was a good day

should have everything on tomorrow.

I grabbed their subframe bolts

if there is more I need to go back and check it out.

Thanks to Factory Dick for the mounts 

Haven’t added too much lately but did swap over to a set of 604 RC bars in this gold color

Found a great deal on another SR so here we go

Pulled the xtrigs of and put on the same Luxon offset and  604 fat bars 

Getting there

Just about the same items for the rider triangle short of another set of ti pegs

Just scored a set of FCP mounts so that will also be the same set up

Bought another new valve cover and will powder coat as it should have been from the factory ala Honda WE 

Heading to Taft tomorrow 

Never race or ride at Honolu hills

Interested to ride back to back before the FCP mounts and ride link and Knuckle go on.

Some fast guys fromthe South OTHG

I have dropped about 42lbs since March so I am hoping my stamina is where it should be 

Thanks I couldn’t pass up the deal on the new to me bike

Under 7k out the door with about 10 hours max in it.

Added the same ride link and knuckle tester and some ti bits.

FCP mounts also.

Probably will get the darn tank cover and ti pegs

Found another A kit shock for a solid deal.

Had my spring powder coated 

Both bikes now have the same rider triangle set up

A few updates to the bike

Put on the powder coated valve cover and core brake lines.

A few more Ti bits along the way also.

A few more ti bolts made it.

Adding arc levers so both bike are just about the same.

Also a few pics from the OTHG national at DT1 last weekend