I have a pair of Showa forks from a 2006 RM125 and a Showa shock from a 2004 RM125. I also have a 2006 RM125 Frame.
FORKS-
There is some wear on the forks from the fork guards rubbing on the fork tube. Otherwise these are in good shape. It appears the fork seals do leak.
SHOCK- This is in good working condition, it came off a running/riding bike and has sat in my toolbox for 2 years now.
FRAME- Good shape, no major damage anywhere, only thing i have noticed is a small mark near the rear brake reservoir bolts that had to be cut off. I can get photos of the frame later as its behind a lot of stuff in my garage.
WHEELS- Complete front wheel with rotor in good shape. Rear rim is by itself, i dont have the hub anymore, unless its in a box somewhere.
PRICING- I'm not really sure what this stuff sells for. I know someday theyll be worth more, but i'd like to clean up mt garage and sell some stuff.
I do have a lot of random pieces and bolts for 01-07 RM125's. If theres something you may need, feel free to ask if i have it.
Forks- $400
Shock- $300
Frame-$350
Wheels-$150
Doesnt include shipping costs but i can get an estimate. Located in Indianapolis
Where was this stuff last winter when I rebuilt my 04. I may take a look and see if I need anything though. If I decide to keep it, extras would be nice to have.
I should have listed it sooner haha. Sure let me know, I have the axles, subframe bolts, throttle tube rubber cover (new), 03 airbox, new spokes.
Sent you a PM
Do you still have the lower link for the shock?
The Shop
Free shipping: VITALMX
Luxon 4-Post Bar Mounts
$189.95 - $239.95
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
I should. Ill check sometime this week.
Have linkage by chance?
Motosport just listed the lower link from PC. I’d grab one while they last. This was one of two available and they previously were on backorder for nearly a year.
Yeah…unfortunately that’s what I’m probably going to have to do. Wasn’t trying to go overboard on this build but it’s already looking that way.
I should. I will check today
I have the pull rod which is 2 pieces. The center knuckle part i sold a while ago
I still have the forks and shock. Devol skid plate, and other small pieces i would like to get rid of.
How much do you want for it? Perky asked first, if he doesn’t want it im interested.
You have the kickstart still?
35 shipped? Has some grind marks on it that could be smoothed out but can use as is.
I dont
Ok, let me make sure it will work, the oem in the parts diagram shows it being one piece for an 06.
I think you are correct. I probably sold that with the linkage knuckle. This piece is from an 01-04 i previously had
Bump still have a lot of this. Make an offer
Post a reply to: 2006 RM125 Suspension, frame, wheels.