1986 RM 125 ?

Jon_Haynes
Profile picture for user Jon_Haynes
Posts
380
Joined
1/24/2011
Location
Clinton, IN, USA
Jon_Haynes
Edited Date/Time 11/17/2022 4:55pm
Is there any wide foot pegs that will fit with little to no grinding/machining ? Anybody have any cool after market goodies to sell for this bike ?
|
sandman768
Profile picture for user sandman768
Posts
8217
Joined
3/21/2014
Location
Saratoga Springs, NY, USA
sandman768 11/15/2022 5:40am
11/15/2022 5:40am Edited Date/Time 11/15/2022 5:43am
The 88 Rm pegs should bolt right on, they are marginally wider. If you want to keep your pegs & pin size the same, you can weld on Works Connection peg wideners. Any newer pegs will require drilling out the pin hole on the frame & coming up with a solution to the spring placement… here is a photo of an 87 I restored using some leftover 92 Rm pegs I had. You will be lucky to find a pipe & silencer for this bike, they are getting very scarce… check the water pump impeller,they are known for breaking & killing the engine..



2
Jon_Haynes
Profile picture for user Jon_Haynes
Posts
380
Joined
1/24/2011
Location
Clinton, IN, USA
Jon_Haynes 11/15/2022 9:55am
11/15/2022 9:55am
Thanks, Sandman. Going through the whole bike now. you know how it is saving old bikes gotta check everything out. my DG pipe is ok. I will look into some 88 pegs and see if they are wide enough.
1
jamiechapman418 11/16/2022 6:56am
11/16/2022 6:56am
I am working on an '88 right now. I bought a used set of pegs as one of mine on the bike was slightly mangled. If you want the old set just to check fitment and compare width you are welcome to have mine.
1
StalkerPJames 11/16/2022 7:45pm
11/16/2022 7:45pm
I just acquired a 1986 125 G model . I got a clutch case that is fubar .. hoping to weld it . Previous owner had it jb welded .. leaked oil really bad .. and the clutch basket hit the repair from push jb weld in the case . It bothers me .. smh...

The Shop

See All »
Jon_Haynes
Profile picture for user Jon_Haynes
Posts
380
Joined
1/24/2011
Location
Clinton, IN, USA
Jon_Haynes 11/17/2022 4:55pm
11/17/2022 4:55pm
I will check some of my old take off pegs this weekend. I will let you know about your 88 old set I after I check what I have. Thanks. looks like even the 88 pegs could use the weld on wideners.

Post a reply to: 1986 RM 125 ?