Any Idea What This Is?

bocephus3000
Profile picture for user bocephus3000
Posts
53
Joined
1/3/2015
Location
Hoschton, GA, USA
bocephus3000
Edited Date/Time 4/4/2021 1:12pm
On why it won't crank...

https://youtu.be/OrQEgak5t94
|
JB500
Profile picture for user JB500
Posts
327
Joined
7/14/2018
Location
Granger, IN, USA
JB500 4/1/2021 2:50pm
4/1/2021 2:50pm
Are you sure you have the timing set correctly? And cam chain adjuster reset when reinstalled?
bocephus3000
Profile picture for user bocephus3000
Posts
53
Joined
1/3/2015
Location
Hoschton, GA, USA
bocephus3000 4/1/2021 3:27pm
4/1/2021 3:27pm
No...I'll check...thanks...I mean I thought I had the timing set with the dots on the cams etc, but my first time doing it so..I'll check...thank you though...cam chain adjuster reset?? What is that exactly??

Thank You,
Jarrad
DynoDan22
Profile picture for user DynoDan22
Posts
769
Joined
9/7/2011
Location
Victorville, CA, USA
DynoDan22 4/1/2021 4:12pm
4/1/2021 4:12pm
Check timing again. If it's off, you need to disassemble the head and make sure you didn't bend the valves due to incorrect timing.
1
bocephus3000
Profile picture for user bocephus3000
Posts
53
Joined
1/3/2015
Location
Hoschton, GA, USA
bocephus3000 4/1/2021 7:19pm
4/1/2021 7:19pm
How do I check timing?

The Shop

See All »
bocephus3000
Profile picture for user bocephus3000
Posts
53
Joined
1/3/2015
Location
Hoschton, GA, USA
bocephus3000 4/1/2021 7:28pm
4/1/2021 7:28pm
Sorry...here is the video I thought I posted...meaning I knew when I did that video that I just had to turn it over with the wrench on the stator side...but this is what it does after I get it off of TDC...but this is the last I've tried to crank it...

https://www.youtube.com/watch?v=dguxxDb0crQ
bocephus3000
Profile picture for user bocephus3000
Posts
53
Joined
1/3/2015
Location
Hoschton, GA, USA
bocephus3000 4/2/2021 6:16am
4/2/2021 6:16am
I had a breather hose I didn't clamp from the engine to the radiator, wasn't it when I clamped it, but you are right, when I put the tensioner in I did it quickly and oddly...so I'll check it again. I cranked it a few times this morning when I tightened the hose...and it still seem like it is solid and no real moving parts banging around...I just feels a little tight...

Thanks You Guys For Your Help,
Jarrad
soggy
Profile picture for user soggy
Posts
8754
Joined
12/3/2018
Location
USA
soggy 4/2/2021 6:29am
4/2/2021 6:29am
You need a manual
bocephus3000
Profile picture for user bocephus3000
Posts
53
Joined
1/3/2015
Location
Hoschton, GA, USA
bocephus3000 4/2/2021 6:48am
4/2/2021 6:48am
No I have a service manual...I just haven't read every word...yet..lols...ty tho...
bocephus3000
Profile picture for user bocephus3000
Posts
53
Joined
1/3/2015
Location
Hoschton, GA, USA
bocephus3000 4/4/2021 7:25am
4/4/2021 7:25am
I haven't counted pins yet...any suggestions tho...

Thank You,
Jarrad


garagedog 4/4/2021 1:12pm
4/4/2021 1:12pm
You have the answers right in front of you in the manual. Read it first. Read it several times slowly.

Your picture needs to be a wider view to see the other dots on the cam. Basically put the crank on TDC, then align the cams.
bocephus3000
Profile picture for user bocephus3000
Posts
53
Joined
1/3/2015
Location
Hoschton, GA, USA
bocephus3000 4/4/2021 3:25pm
4/4/2021 3:25pm
I don't even know where Tulare isss......

Post a reply to: Any Idea What This Is?