Half of the collar missing from case around oil plug

BBarnes720
Posts
70
Joined
2/4/2009
Location
Murphy, NC, USA
Edited Date/Time 12/17/2020 8:46am
I just purchased a 2018 Husky TC 125 and noticed there is a broken piece missing around the clutch side oil plug. It drips enough to be a problem after a few minutes. Any ideas if this can be fixed without buying a new case?


|
FGR01
Posts
6176
Joined
10/1/2006
Location
USA
12/16/2020 6:09pm
Clean, dry, seal it shut with epoxy and use the other drain plug for oil changes.
2
kb228
Posts
6153
Joined
1/31/2018
Location
Mansfield, OH, USA
12/16/2020 6:15pm
Teflon tape
1
Factor E
Posts
988
Joined
9/22/2011
Location
So Cal, CA, USA
12/16/2020 9:52pm Edited Date/Time 12/16/2020 9:56pm

Centerline Welding
Anaheim, CA
714-630-7810
2
hypermoto
Posts
314
Joined
11/10/2020
Location
Bostwick, FL, USA
12/16/2020 10:36pm
Fix it properly. Too nice of a bike to epoxy it closed (I’ve done that... on an 04 rmz250). A good welder can fix that no issues.

The Shop

BBarnes720
Posts
70
Joined
2/4/2009
Location
Murphy, NC, USA
12/17/2020 2:09am
Thanks for all the feedback. The inner clutch case part is only $125. How big of a job is it to replace it? I've done a lot of top ends but no experience with bottom ends.
FGR01
Posts
6176
Joined
10/1/2006
Location
USA
12/17/2020 8:46am
hypermoto wrote:
Fix it properly. Too nice of a bike to epoxy it closed (I’ve done that... on an 04 rmz250). A good welder can fix that no...
Fix it properly. Too nice of a bike to epoxy it closed (I’ve done that... on an 04 rmz250). A good welder can fix that no issues.
The difference is the KTM/Husky 125 has 2 drain bolts. So it's no major loss to seal one shut. He asked how to do it without buying a case.

Anyway, if you're now having a change of heart and want to replace it, it is not a difficult job if you have basic mechanical knowledge about these bikes. You should be able to download the service manual online. Me personally, I'd replace it. I see it's $105 on Rocky Mountain but back ordered. I'd seal it until I could get the part and then replace it. For $105 it's not really worth welding.
4

Post a reply to: Half of the collar missing from case around oil plug

The Latest