Posts
115
Joined
12/7/2017
Location
Scottsdale, AZ
US
Edited Date/Time
6/14/2020 12:49am
I was lucky enough to pick up a fresh 2020 from Western Honda here in AZ last Friday
My theme for this build is the Penrite Honda's with a few personal touches
I've decided to waste no time on this build and stripped it down before starting it
First up is greasing my headset / linkage and get some parts ordered
I'm very fortunate to have some parts from past bikes including 2019 Works Edition suspension, FMF 4.1's, ARC composite levers, and raptor foot pegs
Some pictures cleaning up my 4.1s
Next up is updating my works edition suspension with new springs, new valving specs, and gold valves.
Thankfully it's being done in house by Bob Blose
My theme for this build is the Penrite Honda's with a few personal touches
I've decided to waste no time on this build and stripped it down before starting it
First up is greasing my headset / linkage and get some parts ordered
I'm very fortunate to have some parts from past bikes including 2019 Works Edition suspension, FMF 4.1's, ARC composite levers, and raptor foot pegs
Some pictures cleaning up my 4.1s
Next up is updating my works edition suspension with new springs, new valving specs, and gold valves.
Thankfully it's being done in house by Bob Blose
Super excited to try out the new Renthal FATBAR 36 bars / clamps
I really like the new OEM Honda fatbar bend but they don't offer it in the new bars yet so I went with the closest thing available ( stewart / RV bend)
I got most of my UFO plastics in but still waiting on a few pieces coming from the east coast
With the shock in I put on my FMF's & Raptor Ti pegs
Also got the updated Twin Air filter for the 2020's
Got the forks on and was able the get it off my lift and lay it down to put a new clutch cover on
This is purely for resale purposes since I love the feel of stock clutches but need the durability of the Hinson cover
I also forgot to take pictures of my Factory Connection Pull Rods but you can see em here
A few updated pictures for now
The Shop
Free shipping: VITALMX
Luxon 4-Post Bar Mounts
$189.95 - $239.95
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Went ahead and mounted up a fresh pair of mx33's with new rim locks and kenda tuff tubes
Also got the new UFO stadium plate with the brake line running behind the plate. Not sure if I'm gonna keep this or switch it out with a standard Cycra stadium.
The end goal for this bike is a cool photoshoot with some friends so I'm resisting the urge to ride till it's completely done
I've been hoping the right deal on a set of used clamps will come along since i'm struggling to justify the price of new X-trigs. But If anyone has a set of clamps they want to part with please let me know
Stripped down the front end
The clamps came with a bottom bearing and race so I had to tap out my stock one
The main reason I went with these clamps over an xtrig is bar clamps. Ride engineering uses the stock rubber mounted system allowing me to run the Renthal fatbar 36 clamps and bar.
My plan is to add a showa steering dampener. Lucky I saved one from an old bike but I have order the spacer and hardware
Hoping to get everything here by the end of the week to finish it up
Went with the laser etched number in the front brake cap
Graphics going on
Next up is finished pictures
Pit Row
Post a reply to: FINISHED 2020 crf250r w/pictures