1984 kx125 my new project

RCN4HIM
Profile picture for user RCN4HIM
Posts
225
Joined
1/21/2013
Location
Holly Springs, SC US
RCN4HIM 10/2/2019 2:35am
10/2/2019 2:35am

1
MaxPower
Profile picture for user MaxPower
Posts
2696
Joined
8/15/2006
Location
NJ US
MaxPower 10/4/2019 4:28pm
10/4/2019 4:28pm
I can't say a single bad word about Eric Gorr. He did great for me and my 144 CR.

However I can't say enough good about Tom Morgan. There's more than just doing great motor work when sending your cylinder off to make it fast. He is someone I can recommend and I'm certain the not a single negative comment will come back to me. Go wirh Tom. And be sure to say Kevin and RCN praised his name
bad juju
Profile picture for user bad juju
Posts
514
Joined
12/15/2014
Location
Riverside, CA US
bad juju 10/4/2019 4:33pm
10/4/2019 4:33pm
sending the cases, cylinder and head with crank to Tom tomorrow.
1
dcfitz
Profile picture for user dcfitz
Posts
111
Joined
3/5/2018
Location
Valley Park, MO US
dcfitz 10/7/2019 2:52pm
10/7/2019 2:52pm
Personally, I’d replace wheel bearings, clutch plates, fork seals and shims, swing arm pivot bearings, steering head bearings, all engine seals and what bearings in the cases, or crank that don’t meet spec. Also, check your cylinder and if still in tolerance, ball hone and install a new piston, rings and connecting rod bearing, etc. I did my 81 YZ125, owned since 81, and the crank bearing and other bearings, with the exception of one, we’re all good. Been riding ever since.

The Shop

See All »
MaxPower
Profile picture for user MaxPower
Posts
2696
Joined
8/15/2006
Location
NJ US
MaxPower 10/7/2019 7:06pm
10/7/2019 7:06pm
And stay with the kx crank seals.
I bought the yz seals I was told fit the kx and they aren't close to fitting. I don't know where the mistake or misinformation lies, but the stock parts work fine
bad juju
Profile picture for user bad juju
Posts
514
Joined
12/15/2014
Location
Riverside, CA US
bad juju 1/19/2020 1:25pm
1/19/2020 1:25pm
Well i got another one. This was just for the chassis and misc stuff. This is my 3rd kx125 to get a nice complete racer. This one is pretty good to start with. Got it from the 2nd owner, it runs damm good. Gonna rebuild the suspension and put some rubber on it and ride it while i finish putting the TMR motor back together. This is after a wash and new seat foam and cover.



3
lostboy819 1/19/2020 2:18pm
1/19/2020 2:18pm
bad juju wrote:
I know I should have put them on when I posted but I wanted to at least hose off all the grease and crap. It's way...
I know I should have put them on when I posted but I wanted to at least hose off all the grease and crap. It's way ruff but runs and is mostly there. Some motor stuff..







That is not bad at all, Solid bike to start with and I think it will be a awesome bike when done. I think it looks worse than it is and parts are easy to find too. Keep posting pics as you progress on the project. Cool
1
Suicidal_Tendencies 1/21/2020 8:26pm
1/21/2020 8:26pm Edited Date/Time 1/21/2020 8:26pm
bad juju wrote:
Well i got another one. This was just for the chassis and misc stuff. This is my 3rd kx125 to get a nice complete racer. This...
Well i got another one. This was just for the chassis and misc stuff. This is my 3rd kx125 to get a nice complete racer. This one is pretty good to start with. Got it from the 2nd owner, it runs damm good. Gonna rebuild the suspension and put some rubber on it and ride it while i finish putting the TMR motor back together. This is after a wash and new seat foam and cover.



Great looking bike. This is a 1985, correct?
1
bad juju
Profile picture for user bad juju
Posts
514
Joined
12/15/2014
Location
Riverside, CA US
bad juju 1/21/2020 9:26pm
1/21/2020 9:26pm
bad juju wrote:
Well i got another one. This was just for the chassis and misc stuff. This is my 3rd kx125 to get a nice complete racer. This...
Well i got another one. This was just for the chassis and misc stuff. This is my 3rd kx125 to get a nice complete racer. This one is pretty good to start with. Got it from the 2nd owner, it runs damm good. Gonna rebuild the suspension and put some rubber on it and ride it while i finish putting the TMR motor back together. This is after a wash and new seat foam and cover.



Suicidal_Tendencies wrote:
Great looking bike. This is a 1985, correct?
yes, 1985.
2
Steve F
Profile picture for user Steve F
Posts
41
Joined
4/11/2019
Location
Vista, CA US
Steve F 1/22/2020 12:57pm
1/22/2020 12:57pm
Looking good!!
1
6bt
Profile picture for user 6bt
Posts
38
Joined
2/12/2016
Location
Pompey, NY US
6bt 2/22/2020 8:26pm
2/22/2020 8:26pm
1
bad juju
Profile picture for user bad juju
Posts
514
Joined
12/15/2014
Location
Riverside, CA US
bad juju 3/1/2020 2:46pm
3/1/2020 2:46pm
Been busy, i think i am going down the home stretch now. Maybe, just wanna ride the thing to see what i need for suspension tuning lol.






4

Pit Row

See All »

Post a reply to: 1984 kx125 my new project