I think I need a 1986 cr125 water pump separator

Brian_Bowles
Profile picture for user Brian_Bowles
Posts
532
Joined
11/23/2018
Location
Evans, GA, USA
Brian_Bowles
Edited Date/Time 5/11/2019 3:32pm
So...... I have a leak. I noticed that I do not have a water speparator part number 19222-KA3-760. Look at the picture below. Does it mean there are two versions I’ve the cover and one does not have a separator? I have searched online and I cannot find one.

|
Brian_Bowles
Profile picture for user Brian_Bowles
Posts
532
Joined
11/23/2018
Location
Evans, GA, USA
Brian_Bowles 3/23/2019 4:55pm
3/23/2019 4:55pm
I ordered a water pimp separator for a 1987 CR125. Partzilla has it in stock. I figured maybe it was close and I could modify it.
Brian_Bowles
Profile picture for user Brian_Bowles
Posts
532
Joined
11/23/2018
Location
Evans, GA, USA
Brian_Bowles 3/26/2019 8:22am
3/26/2019 8:22am
Is anyone running their bike without the separator?
Brian_Bowles
Profile picture for user Brian_Bowles
Posts
532
Joined
11/23/2018
Location
Evans, GA, USA
Brian_Bowles 4/9/2019 7:09am
4/9/2019 7:09am
That is a great suggestion. Unfortunately none can be found. I even emailed a dealer in Australia who did a search and said there are non in Australia. I will use that idea again though for other parts. Now I guess I need to find someone who has a parts bike.

The Shop

See All »
TTperra
Profile picture for user TTperra
Posts
311
Joined
9/15/2015
Location
SE
TTperra 4/9/2019 10:37pm
4/9/2019 10:37pm
I forgot to answer your email, i will look if i have one.
But is that the cause of the leak?
Its not corroded magnesium?
Brian_Bowles
Profile picture for user Brian_Bowles
Posts
532
Joined
11/23/2018
Location
Evans, GA, USA
Brian_Bowles 4/10/2019 1:34am
4/10/2019 1:34am
It is not corroded very much. I was lucky in that respect.
mattbrown342
Profile picture for user mattbrown342
Posts
9
Joined
3/13/2019
Location
Weatherford, TX, USA
mattbrown342 5/10/2019 3:04am
5/10/2019 3:04am
Brian_Bowles wrote:
I ordered a water pimp separator for a 1987 CR125. Partzilla has it in stock. I figured maybe it was close and I could modify it.
I’m curious if the 87 separator fit the 86?
Brian_Bowles
Profile picture for user Brian_Bowles
Posts
532
Joined
11/23/2018
Location
Evans, GA, USA
Brian_Bowles 5/10/2019 4:03pm
5/10/2019 4:03pm
No it will not. I have one here
Brian_Bowles
Profile picture for user Brian_Bowles
Posts
532
Joined
11/23/2018
Location
Evans, GA, USA
Brian_Bowles 5/10/2019 4:04pm
5/10/2019 4:04pm
I did find one. A forum member on Thumpertalk found one in his stack of parts.
mattbrown342
Profile picture for user mattbrown342
Posts
9
Joined
3/13/2019
Location
Weatherford, TX, USA
mattbrown342 5/10/2019 6:27pm
5/10/2019 6:27pm
Thanks, I’ll keep looking. I had a chance to buy a complete 85 CR125 a few months ago for $800. I should have jumped on it. I’ve got twice that in the basket case I picked up for $100.
Brian_Bowles
Profile picture for user Brian_Bowles
Posts
532
Joined
11/23/2018
Location
Evans, GA, USA
Brian_Bowles 5/10/2019 7:10pm
5/10/2019 7:10pm
What what year bike do you have?
mattbrown342
Profile picture for user mattbrown342
Posts
9
Joined
3/13/2019
Location
Weatherford, TX, USA
mattbrown342 5/11/2019 4:53am
5/11/2019 4:53am
85 CR125, but I bought a clutch cover from Russell Brown that was machined for 86.
Brian_Bowles
Profile picture for user Brian_Bowles
Posts
532
Joined
11/23/2018
Location
Evans, GA, USA
Brian_Bowles 5/11/2019 7:36am
5/11/2019 7:36am
I searched everywhere for my separator. Your best bet is to find someone in here or on Facebook market place who is parting a bike out. The guy that had my bike before me ran it for years without one. He never knew it was missing.
mattbrown342
Profile picture for user mattbrown342
Posts
9
Joined
3/13/2019
Location
Weatherford, TX, USA
mattbrown342 5/11/2019 11:02am
5/11/2019 11:02am
I will. In the meantime I’ve got plenty to do on this bike. Today I’m tearing down the shocks and rear suspension and replacing seals and bushings. I’m also going to try my hand at refurbishing the oxidized plastic.
Brian_Bowles
Profile picture for user Brian_Bowles
Posts
532
Joined
11/23/2018
Location
Evans, GA, USA
Brian_Bowles 5/11/2019 3:30pm
5/11/2019 3:30pm
I have to refinish my tank. The fenders are cheap to replace and UFO plastic looks great.

Post a reply to: I think I need a 1986 cr125 water pump separator