Does anybody use race gas in their 450...

ACMYERS
Posts
865
Joined
3/21/2008
Location
Zeeland, MI, USA
4/13/2009 11:32am
I'd be afraid to use it in the EFI bikes.
racer369
Posts
631
Joined
4/1/2008
Location
USA
4/13/2009 1:22pm
I used 50/50 pump gas and Cam2, just for the smell of the Cam2, Smile
You can still get Cam2? Havent seen it in years. And it did smell good
ACMYERS
Posts
865
Joined
3/21/2008
Location
Zeeland, MI, USA
4/13/2009 1:38pm
I have a friend that swears by putting Bean oil in his fuel for his four strokes.
brent26wood
Posts
1103
Joined
11/1/2006
Location
Washington, DC, USA
4/13/2009 3:22pm
racer369 wrote:
You can still get Cam2? Havent seen it in years. And it did smell good
Yep, $7 a gallon.

The Shop

mxdad
Posts
482
Joined
4/1/2008
Location
USA
4/13/2009 6:23pm
VP leaded race gas gums up and clogs the pilot jet on our 2008 CRF450's when let sit for more than 3 days. Slight improvement in response over pump gas. 3 times more expensive. I would rather have the bikes start 1-2 kicks after sitting 3 days.
Pump gas for the 450 four strokes is my opinion.
JoeBraxton
Posts
84
Joined
1/29/2009
Location
Spring Valley, CA, USA
4/14/2009 9:03am
I run pump gas with PJ1, Trick or Maxima Hi Test fuel additive and notice my bike runs better and cleaner with them. Less pinging and popping and a more consistent throttle response. Race gas feels like it does about the same.
SteveS
Posts
5598
Joined
8/16/2006
Location
USA
4/14/2009 11:37am Edited Date/Time 4/14/2009 11:38am
mxdad wrote:
VP leaded race gas gums up and clogs the pilot jet on our 2008 CRF450's when let sit for more than 3 days. Slight improvement in...
VP leaded race gas gums up and clogs the pilot jet on our 2008 CRF450's when let sit for more than 3 days. Slight improvement in response over pump gas. 3 times more expensive. I would rather have the bikes start 1-2 kicks after sitting 3 days.
Pump gas for the 450 four strokes is my opinion.
That was the old U4. You were supposed to drain it back into the gas can.

We never had problems with C12 doing that.
bigmaico
Posts
971
Joined
8/15/2006
Location
Kingwood, TX, USA
4/15/2009 2:33pm Edited Date/Time 4/16/2016 11:24pm
I don't run race gas in my KTM 525Sx , But I do run VP C12 in my Maico 490.
The pump gas here in Houston is Crap & has too much alcohol in it to be consistent & it's a pain to keep trying to jet a Bing carb with good gas , no less the crap 91 octane we get here!

Race Gas infromation

Sledneck
Posts
1201
Joined
1/23/2009
Location
Steamboat Springs, CO, USA
4/15/2009 4:08pm
pitbike502 wrote:
cant run race gas in efi Cool
The lead must coat the Catalytic converter internals.

Wait, what? LOL
Remlap
Posts
20
Joined
2/4/2009
Location
., CA, USA
4/16/2009 2:21pm
I am running U4.2 in my 09 KX450F and no problems with the EFI so far and it sounds nice and crisp.
jtiger12
Posts
1723
Joined
8/2/2006
Location
Forest H Ill, MD, USA
4/16/2009 4:31pm
i have ran av gas in mine. 100 octane low lead. i usually run it in the heat of the md summertime. it does help.
ACMYERS
Posts
865
Joined
3/21/2008
Location
Zeeland, MI, USA
4/17/2009 4:28am
Remlap wrote:
I am running U4.2 in my 09 KX450F and no problems with the EFI so far and it sounds nice and crisp.
Thats good to know Rem. Keep us posted on that would you. How many hours do you have on the bike? What type of riding?
Remlap
Posts
20
Joined
2/4/2009
Location
., CA, USA
4/17/2009 7:26am
Remlap wrote:
I am running U4.2 in my 09 KX450F and no problems with the EFI so far and it sounds nice and crisp.
ACMYERS wrote:
Thats good to know Rem. Keep us posted on that would you. How many hours do you have on the bike? What type of riding?
I have 7 hours on it, motocross only over 50 class I will let you know if anything happens.

Post a reply to: Does anybody use race gas in their 450...

The Latest