2008 yz125

Fresh
Posts
722
Joined
5/22/2015
Location
AU
10/20/2017 4:22pm
thereal87 wrote:
If your after a black front brake line guide or rear caliper guard/ disc guard just order the 2015+ as they are black and direct fit
Cool man, thanks!
Fresh
Posts
722
Joined
5/22/2015
Location
AU
10/20/2017 4:23pm
I thought the same thing. The roller is a very tight fit
How did you get the push rod to sit in correctly? Mine just seems all too long
Fresh
Posts
722
Joined
5/22/2015
Location
AU
10/22/2017 5:10pm
thereal87 wrote:
Bummer mate, I forgot how or if I had any troubles with my ARC lever on my yz 250. I just put one on my yz125...
Bummer mate, I forgot how or if I had any troubles with my ARC lever on my yz 250. I just put one on my yz125 but I've got a 2014 crf master cylinder on there for improved braking
So you say the crf master cyl improves the stopping power? I've found one for $90 AUD and I'm considering going one if it makes the fitment of the lever easier and is a general improvement to the build. Also what years are best to look for?
10/26/2017 6:02pm
Fresh wrote:
Build has been really slow lately, I fractured a wrist and have been off work. Once I pay return shipping my replacement rim and other little...
Build has been really slow lately, I fractured a wrist and have been off work. Once I pay return shipping my replacement rim and other little bits will be on their way

I have a little question for anyone with experience with the arc flex lever and nissin master cylinders, I'm having trouble with the fitment. I can't seem to get the push rod in behind the roller and I can't help but think something's wrong, can anyone help
I had no idea but the brake actuator and the whole component itself on my 06 was different from my 16– thought my 06 sunline lever would bolt right on, but it very much didn’t. Had to order a new lever for the newer yz’s, maybe you have a lever that’s made for the newer models?

The Shop

Fresh
Posts
722
Joined
5/22/2015
Location
AU
10/30/2017 7:08pm
Finally got the rear wheel laced up, should have the tyre fitted by the end of the week. The Honda MC is on its way,
Then my front brake setup should be complete. Making steady progress but funds are tight because I'm out of work.

ledger
Posts
3669
Joined
1/17/2013
Location
USA
10/30/2017 9:09pm
The hub's are just down right nasty !! I want em'. Bike is looking good.
Fresh
Posts
722
Joined
5/22/2015
Location
AU
10/30/2017 10:21pm
ledger wrote:
The hub's are just down right nasty !! I want em'. Bike is looking good.
Thanks man, they're easily my favourite part of the build
Spydee
Posts
1995
Joined
12/18/2013
Location
Wales, GB
10/31/2017 4:40am
Good work so far dude, enjoyed reading this from start to present and looking forward to more updates!
Fresh
Posts
722
Joined
5/22/2015
Location
AU
11/2/2017 2:09am
How do y'all like it? Sadly I can no longer use the shed I currently have my bike in, but I have setup a makeshift shop in a horse stable. The rear wheel is at the shop now being trued and having the tyre fitted, once that is done the bike will be here! Not the ideal place to build a bike but I'll have to make do
Fresh
Posts
722
Joined
5/22/2015
Location
AU
11/5/2017 10:49pm
Rear is all done, any idea how to get these tyres back to looking new?

11/6/2017 6:03am
Fresh wrote:
Rear is all done, any idea how to get these tyres back to looking new? [img]https://p.vitalmx.com/photos/forums/2017/11/05/223578/s1200_IMG_5431.jpg[/img]
Rear is all done, any idea how to get these tyres back to looking new?

Looks new to me haha!

You can try some tire shine, makes them darker and sorta waxy?
yz763
Posts
792
Joined
2/6/2009
Location
Altamonte Springs, FL, USA
11/8/2017 9:11am
Fresh wrote:
I'm at a bit of a loss with what to do, it seems the push rod is just way to long to sit in behind the...
I'm at a bit of a loss with what to do, it seems the push rod is just way to long to sit in behind the roller, I'm starting to think it's the wrong lever
I have two of these levers and they both didn't fit. Same issue, the pushrod is too long and won't fit behind the bearing. ARC was of no help and basically told me to kick rocks.
Fresh
Posts
722
Joined
5/22/2015
Location
AU
11/8/2017 4:09pm
yz763 wrote:
I have two of these levers and they both didn't fit. Same issue, the pushrod is too long and won't fit behind the bearing. ARC was...
I have two of these levers and they both didn't fit. Same issue, the pushrod is too long and won't fit behind the bearing. ARC was of no help and basically told me to kick rocks.
Hi, thanks for the reply. What did you do to overcome this? I don't really want to swap to a different brand, I like the ARC levers. I am getting a Honda MC so I'll have to get a new lever anyway
Fresh
Posts
722
Joined
5/22/2015
Location
AU
11/13/2017 3:26am
Fresh wrote:
I'm in the same predicament dude! I was thinking of just spray painting they stock grey coloured units black. Of course it would look a million...
I'm in the same predicament dude! I was thinking of just spray painting they stock grey coloured units black. Of course it would look a million times better if it was a black plastic from manufacturer, but I don't know where to find any!
Dye them in a sauce pan with RIT Dye. They make a black color called "graphite" that can be found at any walmart and makes it...
Dye them in a sauce pan with RIT Dye.

They make a black color called "graphite" that can be found at any walmart and makes it dark black.

You can do your ignition cover as well as the front brake cable guide to turn them dark black.

I can post pictures of how they'll turn out if you'd like?
Could you post photos, getting ideas for the small covers now
Fresh
Posts
722
Joined
5/22/2015
Location
AU
11/13/2017 4:39pm Edited Date/Time 11/13/2017 4:45pm
Master cyl is here, looking for methods of cleanup?

Codey15
Posts
57
Joined
6/23/2017
Location
NZ
11/13/2017 5:15pm Edited Date/Time 11/13/2017 6:19pm
Use some sos pads on that front brake mate, should come up better than new.
Fresh
Posts
722
Joined
5/22/2015
Location
AU
11/17/2017 1:17am
Picked up a couple parts to freshen up my Honda MC, and got a push rod for it. I will be buying the last of my parts online, the local shops just cannot compete with shopping online, even with shipping costs added. f
I found gunk in the reservior and I'm hoping it doesnt need anything else for it to work, always a risk buying second hand

The bike is now in its new home with a sheet over it!
Fresh
Posts
722
Joined
5/22/2015
Location
AU
11/25/2017 3:30pm
Had a lot of trouble getting my order processed by Rocky Mountain, but it's finally been shipped. Waiting for it to arrive now to finish most of the bike. After this it's just a graphics kit and getting the suspension done!

I cleaned up the sub frame a little better. Just using a green scotchbright pad.


I made up a case saver out of aluminium. Do you think it will do the job? While I was down here I noticed I need a new washer for the countershaft sprocket, through the coming weeks I'll be getting small details like that sorted out.

Got the bike out of the shed into some natural light, I will have to polish up the pipe, which has slight surface rust, before I finish it up




11/25/2017 3:44pm
Fresh wrote:
Could you post photos, getting ideas for the small covers now
I’ll get you some close ups of the ignition cover tomorrow. Turns a sorta matte black. Not much gloss to it.
Fresh
Posts
722
Joined
5/22/2015
Location
AU
11/25/2017 4:40pm
Fresh wrote:
Could you post photos, getting ideas for the small covers now
I’ll get you some close ups of the ignition cover tomorrow. Turns a sorta matte black. Not much gloss to it.
The frame is a Matte Black so that should work!
11/26/2017 2:35pm Edited Date/Time 11/26/2017 2:38pm
Fresh wrote:
The frame is a Matte Black so that should work!


Not as matte as I thought, but it came out really nice for the work put in.
Fresh
Posts
722
Joined
5/22/2015
Location
AU
11/26/2017 10:22pm
Fresh wrote:
The frame is a Matte Black so that should work!
[img]https://p.vitalmx.com/photos/forums/2017/11/26/227808/s1200_D2D45331_70FA_4E5A_8FB6_D00831DD90BE.jpg[/img] Not as matte as I thought, but it came out really nice for the work put in.


Not as matte as I thought, but it came out really nice for the work put in.
Have you got any details of the durability of the dye? Looks great to me and I think I'll go down this rout
Fresh
Posts
722
Joined
5/22/2015
Location
AU
11/28/2017 12:38am
Went in to buy some bits and pieces and walked out with some new twinwalls!



11/28/2017 3:16am
Fresh wrote:
Have you got any details of the durability of the dye? Looks great to me and I think I'll go down this rout
That picture is with about 5 hours of riding on it, no wear I can see.

As far as I know, the dye penetrates into the plastic so if you scratch it, it will still be black underneath. I’m not sure if it goes all the way through though.
Fresh
Posts
722
Joined
5/22/2015
Location
AU
12/6/2017 2:05am
A box of parts arrived today, and I got to work putting on the new plastics kit. I'm still waiting for bar mounts for the oversize twinwalls, after they arrive I'll update the thread with photos!
Fresh
Posts
722
Joined
5/22/2015
Location
AU
12/6/2017 3:33pm
If anyone has any advice/tips to provide for mounting the 2015+ cycra power flow front fender, it would be greatly appreciated!
thereal87
Posts
141
Joined
8/2/2016
Location
Sunshine Coast, AU
12/8/2017 7:58pm
Buy one from mx store dude, they have the new shape power flow fender to suit the pre 15 bolt pattern on the older triple clamps
Fresh
Posts
722
Joined
5/22/2015
Location
AU
12/12/2017 11:51pm
I've been back and forth with the company I've chosen to design my graphics, this is what I've decided to go with, something nice and clean that doesn't take away from the bike itself


Fresh
Posts
722
Joined
5/22/2015
Location
AU
12/14/2017 2:09am

Here she is, I have a few small details to finalise. Graphics are currently in shipping. I'm also looking at seatcovers, I want to find something that helps the transition between the blue front end and the black rear
I'm extremely proud of myself for making it this far!

12/14/2017 11:03am
nice build! I think the BUD black seatcover would look good with the black rear.

Here's my bike with a BUD seatcover:


Post a reply to: 2008 yz125

The Latest