78 YZ250E Shock/Swingarm bushings

Sofiedog
Profile picture for user Sofiedog
Posts
61
Joined
4/18/2017
Location
Tucson, AZ, USA
Sofiedog
Edited Date/Time 8/19/2017 10:42am
I have more play than I would like in the lower shock bushing/upper swingarm bushing.




The lower shock and upper swingarm bushings seem worn. There is too much play. The bolt is in good condition. The bushings dont seem to be a replaceable Yamaha part? Does anyone sell bushings? or rebuild the shock and swingarm bushings? I've cleaned them up and lubed them with waterproof grease, for now...get a bit of a 'clunk' when I jump the bike...




|
sandman768
Profile picture for user sandman768
Posts
8100
Joined
3/21/2014
Location
Saratoga Springs, NY, USA
sandman768 8/18/2017 12:30pm
8/18/2017 12:30pm
I have an NOS shock bushing from a 79 full size YZ... Check part #"s & see if they are the same, I paid 50.00, will sell for 25.00 plus shipping.



newmann
Profile picture for user newmann
Posts
24438
Joined
4/1/2008
Location
USA
newmann 8/18/2017 12:37pm
8/18/2017 12:37pm
Or just get the bushing above...Smile
Sofiedog
Profile picture for user Sofiedog
Posts
61
Joined
4/18/2017
Location
Tucson, AZ, USA
Sofiedog 8/18/2017 1:34pm
8/18/2017 1:34pm
wow...great! thx guys!

The Shop

See All »
Sofiedog
Profile picture for user Sofiedog
Posts
61
Joined
4/18/2017
Location
Tucson, AZ, USA
Sofiedog 8/18/2017 1:38pm
8/18/2017 1:38pm Edited Date/Time 8/18/2017 1:40pm
newmann wrote:
I see they have the swing arm pivot kit available here. Might call and see if they have a fix for the upper.


http://www.x-tremevintageyz.com/products#!/All-Balls-Swing-Arm-Bearings…
Thx...my swingarm pivot bearings and collars are good...The worn bushings are in the upper swingarm where the bottom of the shock attaches/ pivots...I can see a bushing in there...but doesn't show up on parts list...
I'll call as you suggest...
Sofiedog
Profile picture for user Sofiedog
Posts
61
Joined
4/18/2017
Location
Tucson, AZ, USA
Sofiedog 8/18/2017 2:13pm
8/18/2017 2:13pm
sandman768 wrote:
I have an NOS shock bushing from a 79 full size YZ... Check part #"s & see if they are the same, I paid 50.00, will...
I have an NOS shock bushing from a 79 full size YZ... Check part #"s & see if they are the same, I paid 50.00, will sell for 25.00 plus shipping.



Ahh...I tried to correlate the '79 lower shock bushing number, but I can't. The '78 parts diagrams do not show it as a replaceable part. The '79 parts diagram shows the replaceable part....but it looks a bit different, to me.
I'm no expert...the '78 and '79 lower shock bushings look different to me in that photo.?
Maybe...the answer is to use a '79 shock in the '78 chasis so it is rebuildable? Does a '79 shock fit in a '78?

sandman768
Profile picture for user sandman768
Posts
8100
Joined
3/21/2014
Location
Saratoga Springs, NY, USA
sandman768 8/18/2017 2:35pm
8/18/2017 2:35pm Edited Date/Time 8/18/2017 2:38pm
I'm sure someone on here knows the answer to the 78-79 shock upgrade, I am not sure...my vast knowledge of useless vintage information is limited to Suzuki"s. Mine may be the upper bearing, I bought both for my 79 yz400 & only replaced 1 of them, I remember I had to visit a friend to use his press to replace it, I thought the shock was going to break, it came out so hard....if it is a serviceable part try Speed & Sport Yamaha in PA, that is where I got all my NOS YZ parts
Sofiedog
Profile picture for user Sofiedog
Posts
61
Joined
4/18/2017
Location
Tucson, AZ, USA
Sofiedog 8/18/2017 3:05pm
8/18/2017 3:05pm Edited Date/Time 8/18/2017 3:06pm
Thx...I'll be patient...I can't be the first with this question and this forum group seems very experienced.
It looks like the same issue with that upper swingarm bushing...it shows up as a replaceable part #38 in the '79 swingarm diagram (bottom), but is not shown in the '78 diagram. So, again, if the bushings are the same...then I can rebuild a '78 upper swingarm with '79 bushings....or I have to get a '79 swingarm to have it rebuildable if its compatible with a '78 chassis...? Kinda the same questions.



MaxPower
Profile picture for user MaxPower
Posts
2700
Joined
8/15/2006
Location
USA
MaxPower 8/19/2017 10:42am
8/19/2017 10:42am
My guess is that the 78 and 79 suspension parts are different dimensions. The 77 and 78 would interchange

Post a reply to: 78 YZ250E Shock/Swingarm bushings