16 Ktm 450 cs118

casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118
Edited Date/Time 3/1/2017 11:07pm
So I got a little ahead of myself and didn't take any pics before I started so this is where I am as of now with my build.








|
casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118 11/7/2016 6:22pm
11/7/2016 6:22pm
Motor is being rebuilt right now with a hi comp piston. The ecu is in route to Tokyo mods for reflash still trying to figure out if I want to continue to run vpr or switch to t4.
Improbably hard to see in the pics but I taped off the frame and got a bed liner spray and sprayed in place of where the grip tape would go since I can wear through tape in 2 laps and hate the feeling of frame guards, so i figured it's worth a shot if it holds up decent. Calipers and master are going to my riding partner who owns a coating company to get cerakote (debating to go with gold like everyone does or something different).


Spuder155 11/8/2016 5:12am
11/8/2016 5:12am
casey118 wrote:
Motor is being rebuilt right now with a hi comp piston. The ecu is in route to Tokyo mods for reflash still trying to figure out...
Motor is being rebuilt right now with a hi comp piston. The ecu is in route to Tokyo mods for reflash still trying to figure out if I want to continue to run vpr or switch to t4.
Improbably hard to see in the pics but I taped off the frame and got a bed liner spray and sprayed in place of where the grip tape would go since I can wear through tape in 2 laps and hate the feeling of frame guards, so i figured it's worth a shot if it holds up decent. Calipers and master are going to my riding partner who owns a coating company to get cerakote (debating to go with gold like everyone does or something different).


Go the burnt bronze cerakoat man. Looks factory as. Lol
rollinwnolan 11/8/2016 5:52am
11/8/2016 5:52am
Spuder155 wrote:
Go the burnt bronze cerakoat man. Looks factory as. Lol
Idk, I would mix it up, so many people are doing that color
casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118 11/8/2016 5:46pm
11/8/2016 5:46pm
Just dropped off some parts to nolan_stromberg at finish first coatings. Check out his 2015 yz 125 round 2 build, guy is the best in the biz when it comes to making your bike look fresh and 1 off.

The Shop

See All »
rollinwnolan 11/8/2016 6:52pm
11/8/2016 6:52pm
casey118 wrote:
Just dropped off some parts to nolan_stromberg at finish first coatings. Check out his 2015 yz 125 round 2 build, guy is the best in the...
Just dropped off some parts to nolan_stromberg at finish first coatings. Check out his 2015 yz 125 round 2 build, guy is the best in the biz when it comes to making your bike look fresh and 1 off.
Thanks man, your parts are in good hands
lumpy790
Profile picture for user lumpy790
Posts
11510
Joined
9/18/2007
Location
York, SC, USA
lumpy790 11/13/2016 3:22pm
11/13/2016 3:22pm
Nice
casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118 11/27/2016 7:08pm
11/27/2016 7:08pm
Got my motor back! Rebuilt with a cp hi comp piston. Also got my ecu back from Tokyo mods.



casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118 11/27/2016 7:11pm
11/27/2016 7:11pm
Pulling all covers off to send to Nolan Stromberg @ finish first coatings. Thinking of doing a charcoal black with a hinson clutch cover.





CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7517
Joined
11/30/2013
Location
Portland/Los Angeles, CA, USA
CarlinoJoeVideo 11/28/2016 2:30am
11/28/2016 2:30am
I'm running T4 in my 250f with a Hi Comp piston and very happy with the performance and cost of T4.
casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118 11/28/2016 6:44am
11/28/2016 6:44am
Ya I was thinking if going with t4 but I decided to go with vpr I like the fact that it's leaded. I ran vpr mixed 50/50 all last season and my motor builder said everything looked excellent internally.
Braden_Steinhour23 12/15/2016 11:19am
12/15/2016 11:19am
Correct me if i am wrong but VP recomends T4 in modern fourstrokes. I am not sure which ones cheaper but you are also fine running premium pump gas, because they are designed specifically for that fuel. The 1-3% horsepower could easily gained by a hi-comp piston.
Giygas 12/15/2016 1:42pm
12/15/2016 1:42pm
casey118 wrote:
Ya I was thinking if going with t4 but I decided to go with vpr I like the fact that it's leaded. I ran vpr mixed...
Ya I was thinking if going with t4 but I decided to go with vpr I like the fact that it's leaded. I ran vpr mixed 50/50 all last season and my motor builder said everything looked excellent internally.
I've never tried vpr, but u4.4 has always served me well.
Kenman
Profile picture for user Kenman
Posts
24
Joined
1/28/2014
Location
New Castle, DE, USA
Kenman 12/15/2016 2:50pm
12/15/2016 2:50pm
Looking good so far! You should try this VP concoction


j368
Profile picture for user j368
Posts
575
Joined
7/13/2014
Location
Tulsa, OK, USA
j368 12/15/2016 7:44pm
12/15/2016 7:44pm
Kenman wrote:
Looking good so far! You should try this VP concoction [img]https://p.vitalmx.com/photos/forums/2016/12/15/164275/s1200_IMG_6314.jpg[/img]
Looking good so far! You should try this VP concoction


He may not want to spend $30 a gallon for the juice.
casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118 12/16/2016 6:48am
12/16/2016 6:48am
Ya I have used u4.4 in the past and it was good fuel a little more expensive then vpr. I choose vpr because of the lead, which t4 does not have I believe the oxygen content is nearly the same between the 2. Tokyo mods said thatit did not matter which of the 2 I use. I should be able to start building the bike around x-mass, it's looking like all my parts will be coated and ready to in another week.

casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118 12/19/2016 4:43pm
12/19/2016 4:43pm




casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118 12/19/2016 4:44pm
12/19/2016 4:44pm
Pics sent from Nolan @ finish first coatings! I can't wait to get them on the bike
bf884
Profile picture for user bf884
Posts
511
Joined
1/11/2016
Location
Belle Chasse, LA, USA
bf884 12/19/2016 8:00pm
12/19/2016 8:00pm
What type of coating?

Pit Row

See All »
HenryA
Profile picture for user HenryA
Posts
3784
Joined
12/29/2011
Location
Stockholm, SE
HenryA 12/20/2016 3:24am
12/20/2016 3:24am
Love the coating!
casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118 12/20/2016 3:28am
12/20/2016 3:28am
It's ceramic coating
j368
Profile picture for user j368
Posts
575
Joined
7/13/2014
Location
Tulsa, OK, USA
j368 12/20/2016 6:07pm
12/20/2016 6:07pm
casey118 wrote:
It's ceramic coating
That guy did a great job!
Travis_Hudson 12/21/2016 4:42pm
12/21/2016 4:42pm
MR12 is the cats meow..........expensive.....but good! On another note, has anyone ever powdercoated there swingarm and then removed it? can you do it without it looking like garbage?
bf884
Profile picture for user bf884
Posts
511
Joined
1/11/2016
Location
Belle Chasse, LA, USA
bf884 12/21/2016 4:57pm
12/21/2016 4:57pm Edited Date/Time 12/21/2016 4:59pm
Travis_Hudson wrote:
MR12 is the cats meow..........expensive.....but good! On another note, has anyone ever powdercoated there swingarm and then removed it? can you do it without it looking...
MR12 is the cats meow..........expensive.....but good! On another note, has anyone ever powdercoated there swingarm and then removed it? can you do it without it looking like garbage?
Air craft remover the brush on kind. I stripped mine. Came out brand new. Powder coat is durable but not to harsh chemicals like that. It will bubble and use a scrapper. Then pressure wash to take the rest off. Continue to apply until its all off.
rollinwnolan 12/22/2016 5:35am
12/22/2016 5:35am
Travis_Hudson wrote:
MR12 is the cats meow..........expensive.....but good! On another note, has anyone ever powdercoated there swingarm and then removed it? can you do it without it looking...
MR12 is the cats meow..........expensive.....but good! On another note, has anyone ever powdercoated there swingarm and then removed it? can you do it without it looking like garbage?
If the powder was applied properly, there will be an abrasive profile on it when you remove the powder coat. I have an industrial paint stripper bath that I use to strplip powder coat before I blast and prep for new coating
rollinwnolan 12/22/2016 5:36am
12/22/2016 5:36am
Travis_Hudson wrote:
MR12 is the cats meow..........expensive.....but good! On another note, has anyone ever powdercoated there swingarm and then removed it? can you do it without it looking...
MR12 is the cats meow..........expensive.....but good! On another note, has anyone ever powdercoated there swingarm and then removed it? can you do it without it looking like garbage?
bf884 wrote:
Air craft remover the brush on kind. I stripped mine. Came out brand new. Powder coat is durable but not to harsh chemicals like that. It...
Air craft remover the brush on kind. I stripped mine. Came out brand new. Powder coat is durable but not to harsh chemicals like that. It will bubble and use a scrapper. Then pressure wash to take the rest off. Continue to apply until its all off.
This works too. It's time consuming and extremely messy, but effective.
casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118 12/24/2016 3:44pm
12/24/2016 3:44pm
Cases and covers are on and motor in the bike. I know it looks bad with the clutch cover right now but there will be a black hinson cover on soon.



Shannon ward
Profile picture for user Shannon ward
Posts
226
Joined
11/6/2014
Location
Elkhorn City, KY, USA
Shannon ward 12/24/2016 4:54pm
12/24/2016 4:54pm
Sweet build
casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118 12/26/2016 7:18pm
12/26/2016 7:18pm






smoothies862 12/27/2016 3:03pm
12/27/2016 3:03pm
the longer I look the more I like. if I may add. can we hit that can with something? stickers coating?
casey118
Profile picture for user casey118
Posts
43
Joined
12/8/2015
Location
USA
casey118 12/27/2016 4:50pm
12/27/2016 4:50pm
Pipe sticker? I think it looks clean without the stickers. Thinking of getting a full carbon rocket can and mating it up to the FMF mega bomb.

Post a reply to: 16 Ktm 450 cs118