3D printing in moto

NHtoWA421
Posts
578
Joined
8/4/2014
Location
Bremerton, WA, USA
10/18/2016 4:24pm
I think we just got a whole lot closer....
https://robotbike.co/?v=7516fd43adaa

http://m.pinkbike.com/news/robot-bike-co-r160-custom-review-2016.html

According to the article the bike frame runs about 4300, which isn't a whole lot more than comparable custom carbon or al frames. I realize that the stresses involved in moto are a bit more than a 160mm mtb, but still, I think we're on the cusp, especially for some of the bigger budgets.

slowgti
Posts
1010
Joined
1/14/2016
Location
Monroe, GA, USA
10/18/2016 7:32pm


Not moto related, but, you can see what people are doing with additive machining.
Bearuno
Posts
5723
Joined
6/28/2014
Location
AU
10/18/2016 8:02pm
NHtoWA421 wrote:
I think we just got a whole lot closer.... https://robotbike.co/?v=7516fd43adaa http://m.pinkbike.com/news/robot-bike-co-r160-custom-review-2016.html According to the article the bike frame runs about 4300, which isn't a whole lot...
I think we just got a whole lot closer....
https://robotbike.co/?v=7516fd43adaa

http://m.pinkbike.com/news/robot-bike-co-r160-custom-review-2016.html

According to the article the bike frame runs about 4300, which isn't a whole lot more than comparable custom carbon or al frames. I realize that the stresses involved in moto are a bit more than a 160mm mtb, but still, I think we're on the cusp, especially for some of the bigger budgets.

I was going to put that link up.

Seems a perfect use of additive manufacturing - making lugs.

I've made bicycle and motorcycle frames for over 40 years now - but never 'old fashioned' brazed lug and tube insertion. Always mitres and TIG. And, I'm not about to change, as I've absolutely no need to. But, this really does present a viable use for a (relatively) new manufacturing process, being used with quite an ancient joint interface 'base' idea.

I quite like it.

The bike itself - meh, and, Dave Weagles latest variation of his 'DW' suspension design, even more of a 'meh' - there's far too much 'guruing' of designers, and endless BS with regards to suspension design. It's all predominantly about marketing BS - though, I concede that it's necessary when you are selling designs / selling many, many bikes - you need to come up with a speel / set of acronyms to convince the punters that your's is 'the very bestest '..........................
NHtoWA421
Posts
578
Joined
8/4/2014
Location
Bremerton, WA, USA
10/18/2016 9:12pm
Bearuno wrote:
I was going to put that link up. Seems a perfect use of additive manufacturing - making lugs. I've made bicycle and motorcycle frames for over...
I was going to put that link up.

Seems a perfect use of additive manufacturing - making lugs.

I've made bicycle and motorcycle frames for over 40 years now - but never 'old fashioned' brazed lug and tube insertion. Always mitres and TIG. And, I'm not about to change, as I've absolutely no need to. But, this really does present a viable use for a (relatively) new manufacturing process, being used with quite an ancient joint interface 'base' idea.

I quite like it.

The bike itself - meh, and, Dave Weagles latest variation of his 'DW' suspension design, even more of a 'meh' - there's far too much 'guruing' of designers, and endless BS with regards to suspension design. It's all predominantly about marketing BS - though, I concede that it's necessary when you are selling designs / selling many, many bikes - you need to come up with a speel / set of acronyms to convince the punters that your's is 'the very bestest '..........................
Yeah, lugs for forks, custom levers, triple clamps, custom linkages, all that is a possibility!

I agree with you 100 percent on the dw link thing. There is way too much smoke, mirrors and marketing, which I understand, it's to create something different to separate oneself from the others. But, that being said, I am floored that more companies haven't employed the classic double wishbone suspension. You can get pretty much any axle path you want with a double wishbone.

The Shop

MxKyle (MD)
Posts
72
Joined
4/1/2008
Location
Orlando, FL, USA
10/19/2016 7:09am
First, I am a retired professional motocrosser and if you are in the least bit interested you’ll find out that the older I get the faster I was!

The rest of the time I am the project engineer in charge of designing and building full scale trainers to teach technicians/mechanics how to work on our new F35 fighter jets. Each trainer designed to teach one bay in this aircraft will cost about 3 million dollars. Sounds like a lot but it’s still a lot cheaper than turning green mechanics loose on a +100 million dollar aircraft where a mistake could certainly cost more. We price all the components we have to replicate to determine if it is cost effective to simply buy a flight worthy part from the actual manufactures. By the time those parts have passed all of the tests and inspections required for flight it is almost always cheaper for us to design a replica from the ground up and have it built from cheaper materials. We don't need no stinking titanium!

This a where using 3D printers is cost effective. It’s in building one off parts. We can print things that look like working ducts with crazy bends. We print them overnight then paint them to match the aircraft component and when they are installed in our trainer they are indistinguishable from the real thing. We have some parts printed and nickel plated and they look so real our customer (the US Air Force) made us label them in bold letters that they are for trainer use only so that they won’t somehow wind up on an aircraft. We also need quite a few flexible accordion rubber covers in different shapes and sizes. Minimum cost to have an aluminum mold machined (in China) and shipped here to a casting house to make a part is about $60K. We print the mold for a 6 inch diameter accordion boot over the weekend and clean it up and cast the rubber parts the next day for about $600 total in part and labor.

If you were needing to mass produce anything then 3D printing is not yet an option. It you need one or two copies and the material meets your needs it is hard to ignore printing of complex parts especially given that you can print shapes that cannot be machined. Our 3D printer runs 24/7 and we recovered it's $130K cost in the first 8 months.

Kyle T

Post a reply to: 3D printing in moto

The Latest