Are you over Showa TAC fork?

Preston412
Posts
1003
Joined
10/5/2012
Location
Saint Augustine, FL, USA
Edited Date/Time 12/13/2015 6:56pm
Then convert, long live springs.....I having nothing but awesome things to say about the Racetech kit.

|
mb
Posts
775
Joined
7/22/2014
Location
Columbia, SC, USA
12/13/2015 5:51pm
Looks good. What is that, +12mm in the clamps?
Preston412
Posts
1003
Joined
10/5/2012
Location
Saint Augustine, FL, USA
12/13/2015 6:05pm
mb wrote:
Looks good. What is that, +12mm in the clamps?
10mm, I use that setting to help the front settle into turns with the TAC setup and just left it there for comparison with the spring kit. I will probably change to 7.5mm or 5mm when I get to a track with wider turns.
12/13/2015 6:36pm
Did you send them only the right fork? Valving in the left one stock? I'm interested in doing this on my 15' RMZ450.
Bruce372
Posts
6329
Joined
4/1/2008
Location
USA
12/13/2015 6:38pm
I like my 2015rmz tac forks once I went much softer on the mid and base valves.

BUT It's cool race tech have a relatively inexpensive solution if you don't want to deal with air pressure, can you take it out the bike when you sell it???

The Shop

Bruce372
Posts
6329
Joined
4/1/2008
Location
USA
12/13/2015 6:39pm
Ps. My tac fork was so much better once I stripped the air piston and us some slick grease...no sticton after that.

Sfk have a complete low friction solution.
Preston412
Posts
1003
Joined
10/5/2012
Location
Saint Augustine, FL, USA
12/13/2015 6:56pm Edited Date/Time 12/13/2015 7:09pm
Did you send them only the right fork? Valving in the left one stock? I'm interested in doing this on my 15' RMZ450.
My tech installed it but if you want to send to race tech, you just send air fork side.
Nothing stock, I have gold valves on left side and SKF self lubricating seals
The kit is well worth the price.
Bruce, the kit is removable

Post a reply to: Are you over Showa TAC fork?

The Latest