09 crf450r won't start

lopezisaac11
Profile picture for user lopezisaac11
Posts
6
Joined
9/18/2015
Location
Helendale, CA, USA
lopezisaac11
Edited Date/Time 9/19/2015 8:45pm
I have an 09 crf 450r and I can't get it to start, I replaced the stator, coil, ignition pack, and spark plug. it is not getting any spark at all, can anyone help me with this issue?
|
BobPA
Profile picture for user BobPA
Posts
8340
Joined
10/31/2013
Location
USA
BobPA 9/18/2015 6:45pm
9/18/2015 6:45pm
Kill switch
USMCMXer
Profile picture for user USMCMXer
Posts
860
Joined
9/18/2015
Location
Farmington, MN, USA
USMCMXer 9/18/2015 6:50pm
9/18/2015 6:50pm
By kill switch, just unplug it and see if it starts. If so, bad kill switch...I've had it happen after a crash...
lopezisaac11
Profile picture for user lopezisaac11
Posts
6
Joined
9/18/2015
Location
Helendale, CA, USA
lopezisaac11 9/18/2015 6:52pm
9/18/2015 6:52pm
I unplugged it and it still didn't spark
USMCMXer
Profile picture for user USMCMXer
Posts
860
Joined
9/18/2015
Location
Farmington, MN, USA
USMCMXer 9/18/2015 6:57pm
9/18/2015 6:57pm
How are you checking for spark?

The Shop

See All »
USMCMXer
Profile picture for user USMCMXer
Posts
860
Joined
9/18/2015
Location
Farmington, MN, USA
USMCMXer 9/18/2015 7:02pm
9/18/2015 7:02pm Edited Date/Time 9/18/2015 7:02pm
Plug needs to be grounded, i.e. touching metal when you crank it...if not, no sparky. Check all of the other grounds as well on all ignition parts for corrosion or broken leads. Also check tip-over sensor (lil black cannister looking piece in a rubber boot, about 2" long).
lopezisaac11
Profile picture for user lopezisaac11
Posts
6
Joined
9/18/2015
Location
Helendale, CA, USA
lopezisaac11 9/18/2015 7:02pm
9/18/2015 7:02pm
Put the plug in the coil and putting it against a ground
lopezisaac11
Profile picture for user lopezisaac11
Posts
6
Joined
9/18/2015
Location
Helendale, CA, USA
lopezisaac11 9/18/2015 7:04pm
9/18/2015 7:04pm
USMCMXer wrote:
Plug needs to be grounded, i.e. touching metal when you crank it...if not, no sparky. Check all of the other grounds as well on all ignition...
Plug needs to be grounded, i.e. touching metal when you crank it...if not, no sparky. Check all of the other grounds as well on all ignition parts for corrosion or broken leads. Also check tip-over sensor (lil black cannister looking piece in a rubber boot, about 2" long).
Where is that tip over sensor at? On the air filter box?
Chris O'Neal
Profile picture for user Chris O'Neal
Posts
1149
Joined
11/5/2007
Location
Essex, CT, USA
Chris O'Neal 9/19/2015 12:24am
9/19/2015 12:24am
I had the same problem and it turned out to be the sensor in the air box. That bike was a nightmare!
lopezisaac11
Profile picture for user lopezisaac11
Posts
6
Joined
9/18/2015
Location
Helendale, CA, USA
lopezisaac11 9/19/2015 8:45pm
9/19/2015 8:45pm
Chris O'Neal wrote:
I had the same problem and it turned out to be the sensor in the air box. That bike was a nightmare!
Did yours sound like it wanted to start? And was yours not getting spark either?

Post a reply to: 09 crf450r won't start