2015 YZ250f recall

slipdog
Profile picture for user slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
slipdog
Edited Date/Time 2/24/2015 6:16am
I hadn't heard of this yet, does anyone know what the reason fro the recall is? I would assume it's not related to the shifter bearing/roller from last years bike, but the story doesn't give details of the issue.

http://www.cpsc.gov/en/Recalls/Recall-Alerts/2015/Yahama-Recalls-YZ250-Competition-Off-Road-Motorcycles/
|
TX24
Profile picture for user TX24
Posts
2767
Joined
5/7/2010
Location
San Antonio, TX, USA
TX24 1/31/2015 11:57am
1/31/2015 11:57am
I followed that link in the link and came to a dead end.
Jono
Profile picture for user Jono
Posts
535
Joined
9/17/2011
Location
AU
Jono 1/31/2015 12:13pm
1/31/2015 12:13pm
What could cause that?

Hazard:
The engine can lock up during operation, causing a rider to lose control of the vehicle and crash, resulting in injuries and death.
MarkF
Profile picture for user MarkF
Posts
381
Joined
3/18/2013
Location
Colorado Springs, CO, USA
MarkF 1/31/2015 12:24pm
1/31/2015 12:24pm
It is a faulty balancer gear on the crank. Only a limited number of bikes have the bad gear. You can check your VIN # for verification. It is an easy fix. A couple of new gears on the clutch side and some gaskets and retainers and your done.Don't blow it off, because it can cause catastrophic damage.
slipdog
Profile picture for user slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
slipdog 1/31/2015 12:31pm
1/31/2015 12:31pm
MarkF wrote:
It is a faulty balancer gear on the crank. Only a limited number of bikes have the bad gear. You can check your VIN # for...
It is a faulty balancer gear on the crank. Only a limited number of bikes have the bad gear. You can check your VIN # for verification. It is an easy fix. A couple of new gears on the clutch side and some gaskets and retainers and your done.Don't blow it off, because it can cause catastrophic damage.
Thank you, I know a few families that have new 2015's now and I want to spread the word so everyone knows.

The Shop

See All »
smoothies862 1/31/2015 2:33pm
1/31/2015 2:33pm
i read 123 bikes were affected. the dealer ran my vin when i picked mine up,it was clear. a dealer in indiana had one that was in the bad vin range and he couldnt sell it until balancer gear was updated. i think it was the material not the design.
YamaLink
Profile picture for user YamaLink
Posts
336
Joined
5/25/2010
Location
Bum Bum, ID, USA
YamaLink 1/31/2015 7:00pm
1/31/2015 7:00pm
One local bike was recalled. The handful of other 2015 YZ250F were good to go. As stated it's a quick and easy fix for the dealer.
Kennamer558
Profile picture for user Kennamer558
Posts
2
Joined
2/22/2015
Location
El Cajon, CA, USA
Kennamer558 2/22/2015 6:08pm
2/22/2015 6:08pm
Has anyone heard anymore on this? Just called the shop I bought it from and they ran my vin and didn't find a recall, however mine was bought in the same time frame as the recalled ones and I was out riding today and the motor completely seized up on me. It's stuck in gear and also won't kick over. Let me know if anyone has heard anything. Thanks!
smoothies862 2/22/2015 7:03pm
2/22/2015 7:03pm
wow,thats a bad deal.hopefully you didnt crash. i havent heard anything different since the dealer ran the vin. hopefully yamaha will take care of it. how many hours do you have? im at 2 .post on thumpertalk under yz250f,they have some guys pretty up to date in that area. good luck and let us know.
Kennamer558
Profile picture for user Kennamer558
Posts
2
Joined
2/22/2015
Location
El Cajon, CA, USA
Kennamer558 2/22/2015 7:16pm
2/22/2015 7:16pm
Smoothies, luckily it happened on the landing of a pretty mellow table so I was okay, Thanks! And I will definitely be contacting Yamaha tomorrow and try to get it figured out!
brimx153
Profile picture for user brimx153
Posts
3344
Joined
5/3/2012
Location
IE
brimx153 2/22/2015 8:01pm
2/22/2015 8:01pm
Think they are a yr late. , I ve seen 6 lock up with in two hours of use .
smoothies862 2/23/2015 6:09pm
2/23/2015 6:09pm
do you mean 14's brimx153? hopefully this doesnt turn into a mass problem. i really like this bikeDry
brimx153
Profile picture for user brimx153
Posts
3344
Joined
5/3/2012
Location
IE
brimx153 2/23/2015 7:56pm
2/23/2015 7:56pm
smoothies862 wrote:
do you mean 14's brimx153? hopefully this doesnt turn into a mass problem. i really like this bikeDry
Yea the 14 , people had a lot of trouble with them. Very strange being a Yamaha and all normally rock solid.
Jakes Dad
Profile picture for user Jakes Dad
Posts
1864
Joined
6/22/2009
Location
Brooksville, FL, USA
Jakes Dad 2/24/2015 12:41am
2/24/2015 12:41am
Nothing changed in 15, local builder here has put about a dozen CP rods in them. Nasty surprise when they break.
newmann
Profile picture for user newmann
Posts
24437
Joined
4/1/2008
Location
USA
newmann 2/24/2015 6:14am
2/24/2015 6:14am
Hazard:

The engine can lock up during operation, causing a rider to lose control of the vehicle and crash, resulting in injuries and death.

Remedy:
Repair

LOL.

Still waiting for them to recall my 2001 model for the same hazard.Laughing Laughing
newmann
Profile picture for user newmann
Posts
24437
Joined
4/1/2008
Location
USA
newmann 2/24/2015 6:16am
2/24/2015 6:16am
smoothies862 wrote:
do you mean 14's brimx153? hopefully this doesnt turn into a mass problem. i really like this bikeDry
brimx153 wrote:
Yea the 14 , people had a lot of trouble with them. Very strange being a Yamaha and all normally rock solid.
YZ250F's being rock solid? Blink

Post a reply to: 2015 YZ250f recall