Suzuki RM125 1977 fork Disassemble

narrowfarm
Posts
101
Joined
9/5/2014
Location
Smithtown, NY, USA
Edited Date/Time 2/1/2015 2:04pm
Hello, I have 1977 and 1980 RM125 front forks I would like to replace the fork seals. The Allen bolts on the bottom of the tubes just spin while I have the forks all together.
I remember many years ago on another 1982 RM125 fork, making a long rod with a big nut on the end to slide down the tube so I could loosen the Allen bolt,,I don't remember the size of the nut that I welded onto the long rod that I slide down the fork tube??? any Ideas ,,,, or any Ideas how I should go about taking the forks apart?? thanks
|
450exc115
Posts
722
Joined
11/6/2014
Location
Hebron, CT, USA
1/24/2015 6:14am
If you compress the fork and then use a impact wrench on the allen it should spin right off. I also know folks that jam a broom handle down the inner tube to keep it from spinning.

Good luck!
captmoto
Posts
5929
Joined
4/22/2009
Location
Rancho Cucamonga, CA, USA
1/24/2015 10:11am
What EXC450 said. Put the spring back in, turn it upside down on a scrap of carpet or wood. Put some pressure on it and hit it with an impact.
Lonestar_399
Posts
600
Joined
2/15/2009
Location
Dallas, TX, USA
1/24/2015 3:24pm
It seems like I did the broom handle trick on both those forks. The Yamaha 125's I have a rod with a 22mm head and 24mm head nut welded on the end. I've also done the impact wrench trick but on stubborn allen's/dampner rods it didn't always work.

Let us know what worked for you.
rcmshop
Posts
4
Joined
1/31/2012
Location
Bruce, WI, USA
1/27/2015 1:38pm
If you're still having issues getting the screw out of the damper rod, I make a special tool to mimic the Suzuki special tool (p/n 09940-34511) designed for the job. Let me know if you're interested. Makes quick work of it :-)



The Shop

Lonestar_399
Posts
600
Joined
2/15/2009
Location
Dallas, TX, USA
2/1/2015 2:04pm
rcmshop wrote:
If you're still having issues getting the screw out of the damper rod, I make a special tool to mimic the Suzuki special tool (p/n 09940-34511)...
If you're still having issues getting the screw out of the damper rod, I make a special tool to mimic the Suzuki special tool (p/n 09940-34511) designed for the job. Let me know if you're interested. Makes quick work of it :-)



Interested in one of these. It may even work for another set of forks I have.

Post a reply to: Suzuki RM125 1977 fork Disassemble

The Latest