Welded radiators for C4MX

stillwelding
Posts
3239
Joined
1/22/2007
Location
Santa Clarita, CA, USA
Edited Date/Time 10/16/2014 12:25am
Got these radiators from Frenchie at C4MX on Friday. He does nice work and I always appreciate him sending me some work. Thanks Frenchie! http://www.c4mx.com/ These are for a 450 and 250 Kawasaki.



|
The Rock
Posts
8758
Joined
3/21/2007
Location
HAIKU, HI, USA
5/31/2011 7:31pm
Nice work!

Is that one of those gas tank holder deals covered up?
stillwelding
Posts
3239
Joined
1/22/2007
Location
Santa Clarita, CA, USA
5/31/2011 7:36pm
The Rock wrote:
Nice work!

Is that one of those gas tank holder deals covered up?
Yeah! You have X-ray eyes? Laughing
5/31/2011 7:43pm
Im no welder , but them welds look great,,

I broke a radiator on a KX 250 once, and was going to buy another, but they were 2-300$ cant remember, i had a guy that was a high school , welding instructer, (shop teacher?) he welded it back for me for 30$, that was in 1996 though, so im sure it would be alot more now,,
EvanR127
Posts
919
Joined
1/22/2011
Location
Huntington Beach, CA, USA
5/31/2011 7:48pm Edited Date/Time 5/31/2011 7:57pm
Do you weld radiators just for strength or does it also add cooling?

Have you tried welding on braces? This is how I plan to do mine.

The Shop

tunedlength
Posts
2791
Joined
12/9/2006
Location
Ontario, CA, USA
5/31/2011 8:12pm
Got these radiators from Frenchie at C4MX on Friday. He does nice work and I always appreciate him sending me some work. Thanks Frenchie! [url=http://www.c4mx.com/]http://www.c4mx.com/[/url] These...
Got these radiators from Frenchie at C4MX on Friday. He does nice work and I always appreciate him sending me some work. Thanks Frenchie! http://www.c4mx.com/ These are for a 450 and 250 Kawasaki.



Is that 2%Thoriated ground for an inverter machine in the fore ground?
Looks like you need a new wire brush.
Is that white thing a coffee maker or a toilet roll dispenser?
How come your welds look really good but my welds look like Aves Dung?
I see what looks like a Bosch tool way back there (you must charge to much)
The Rock
Posts
8758
Joined
3/21/2007
Location
HAIKU, HI, USA
5/31/2011 8:18pm
The Rock wrote:
Nice work!

Is that one of those gas tank holder deals covered up?
Yeah! You have X-ray eyes? Laughing
How much are those things? I was at a race recently and saw a mechanic remove a gas tank on an EFI machine and put the tank ON THE GROUND!
stillwelding
Posts
3239
Joined
1/22/2007
Location
Santa Clarita, CA, USA
5/31/2011 9:24pm
EvanR127 wrote:
Do you weld radiators just for strength or does it also add cooling? Have you tried welding on braces? This is how I plan to do...
Do you weld radiators just for strength or does it also add cooling?

Have you tried welding on braces? This is how I plan to do mine.
I've been doing these for quite awhile. The welding is for reinforcement only. As far as I know, it doesn't improve the cooling. As far as the bracing, I have added straight round rod across the radiators (like you see on some teams bikes) but never the corner bracing as shown in the photo. I only do what a customer asks for. But it has been my experience, that the type of radiator bracing shown, tends to tear the radiators tank (which is only about half a M.M. 0.020 inch) in any subsequent crash. Some guys have me only weld the spigots, and some spigots and tanks (used to weld the radiator cap collar for Frenchie, but they tended to distort and cause the cap to leak). Just welded tank and spigots allow a radiator to be quite distorted and still hold coolant until the end of a moto.
stillwelding
Posts
3239
Joined
1/22/2007
Location
Santa Clarita, CA, USA
5/31/2011 9:38pm
Got these radiators from Frenchie at C4MX on Friday. He does nice work and I always appreciate him sending me some work. Thanks Frenchie! [url=http://www.c4mx.com/]http://www.c4mx.com/[/url] These...
Got these radiators from Frenchie at C4MX on Friday. He does nice work and I always appreciate him sending me some work. Thanks Frenchie! http://www.c4mx.com/ These are for a 450 and 250 Kawasaki.



Is that 2%Thoriated ground for an inverter machine in the fore ground? Looks like you need a new wire brush. Is that white thing a coffee...
Is that 2%Thoriated ground for an inverter machine in the fore ground?
Looks like you need a new wire brush.
Is that white thing a coffee maker or a toilet roll dispenser?
How come your welds look really good but my welds look like Aves Dung?
I see what looks like a Bosch tool way back there (you must charge to much)
Dear Tuned length, I still use 2 %, even on Aluminum, as Pure tungsten (green) tends to throw the balled end off with no notice (no shaking ball end) like you get with 2%. I tend to run too small a diameter for a given amperage on light gauge aluminum, as I feel it gives me better arc control and I just change electrodes as the ball grows bigger than I like. And I love inverters, but still use a traditional transformer with H.F. for dip brazed radiators. The inverters just don't give me the arc I want because they don't use REAL H.F., they count on the switching frequency of the inverter to simulate H.F. (cheaper for the welding equipment manufacturer). Real H.F. just plows through the salts that sometimes affect the current flow of an inverter.

As for the wire brush, I just keep grinding them until they wear out (they're expensive).

The toilet paper roll holder goes with the two sheet metal R2 D2 feet just behind them. It's a cover for the feet on a full sized radio controlled R2 D2 of a customer of mine.

That's not a Bosch, it's a Metabo. German made and damn good.

Invite me down sometime to show me what's new. I'll buy you lunch off the Roach Coach.
kopfjaeger
Posts
985
Joined
3/9/2008
Location
Panther City, TX, USA
5/31/2011 10:36pm
Probably the most interesting thread I've seen on here in a while!!!!!
tunedlength
Posts
2791
Joined
12/9/2006
Location
Ontario, CA, USA
6/1/2011 8:14pm
Got these radiators from Frenchie at C4MX on Friday. He does nice work and I always appreciate him sending me some work. Thanks Frenchie! [url=http://www.c4mx.com/]http://www.c4mx.com/[/url] These...
Got these radiators from Frenchie at C4MX on Friday. He does nice work and I always appreciate him sending me some work. Thanks Frenchie! http://www.c4mx.com/ These are for a 450 and 250 Kawasaki.



Is that 2%Thoriated ground for an inverter machine in the fore ground? Looks like you need a new wire brush. Is that white thing a coffee...
Is that 2%Thoriated ground for an inverter machine in the fore ground?
Looks like you need a new wire brush.
Is that white thing a coffee maker or a toilet roll dispenser?
How come your welds look really good but my welds look like Aves Dung?
I see what looks like a Bosch tool way back there (you must charge to much)
Dear Tuned length, I still use 2 %, even on Aluminum, as Pure tungsten (green) tends to throw the balled end off with no notice (no...
Dear Tuned length, I still use 2 %, even on Aluminum, as Pure tungsten (green) tends to throw the balled end off with no notice (no shaking ball end) like you get with 2%. I tend to run too small a diameter for a given amperage on light gauge aluminum, as I feel it gives me better arc control and I just change electrodes as the ball grows bigger than I like. And I love inverters, but still use a traditional transformer with H.F. for dip brazed radiators. The inverters just don't give me the arc I want because they don't use REAL H.F., they count on the switching frequency of the inverter to simulate H.F. (cheaper for the welding equipment manufacturer). Real H.F. just plows through the salts that sometimes affect the current flow of an inverter.

As for the wire brush, I just keep grinding them until they wear out (they're expensive).

The toilet paper roll holder goes with the two sheet metal R2 D2 feet just behind them. It's a cover for the feet on a full sized radio controlled R2 D2 of a customer of mine.

That's not a Bosch, it's a Metabo. German made and damn good.

Invite me down sometime to show me what's new. I'll buy you lunch off the Roach Coach.
All very cool stuff (as usual)
Our door is always open and the food poisoning will be my treat!
mx295
Posts
4296
Joined
4/1/2008
Location
Quartz Hill, CA, USA
6/1/2011 8:15pm
Frenchies my boy.. He's the man to go to for motor mods
RACEGUY
Posts
1893
Joined
8/25/2009
Location
Moncton, CA
6/1/2011 8:30pm
No offense, Mr. Welding, but saying Frenchie "does nice work" is like calling the Japanese Tsunami a wave.

Nice welds, by the way.
GuyB
Posts
35722
Joined
7/10/2006
Location
Aliso Viejo, CA, USA
6/1/2011 10:44pm
kopfjaeger wrote:
Probably the most interesting thread I've seen on here in a while!!!!!
There are the occasional gems. Smile
calimxer91
Posts
5077
Joined
4/1/2008
Location
Lancaster, CA, USA
6/1/2011 11:13pm
Yeah,waves of roost from his modded engines.
6/2/2011 7:40am
do you ever add anymore tank room to, say, the bottom of stock tanks?
stillwelding
Posts
3239
Joined
1/22/2007
Location
Santa Clarita, CA, USA
6/2/2011 10:02am
do you ever add anymore tank room to, say, the bottom of stock tanks?
No, I haven't. My understanding though, is more coolant capacity without more radiator fins, doesn't provide much benefit.
6/2/2011 10:23am
do you ever add anymore tank room to, say, the bottom of stock tanks?
No, I haven't. My understanding though, is more coolant capacity without more radiator fins, doesn't provide much benefit.
that was my next question. thanks.
6/2/2011 10:38am
so this...

probably isnt anymore more cooling efficient (and just adds more weight) than this...
dkg
Posts
1889
Joined
9/12/2010
Location
Rancho Cucamonga, CA, USA
6/2/2011 1:40pm Edited Date/Time 6/2/2011 1:41pm
I have been very curious about this on the JGRMX concept bike. It is described as: "A light weight special aluminum extrusion cooling system takes the place of conventional radiators". Anyone know much about this?

stillwelding
Posts
3239
Joined
1/22/2007
Location
Santa Clarita, CA, USA
6/2/2011 6:28pm
so this... [img]https://p.vitalmx.com/photos/users/64/photos/47600/s780_052111hangtownfri018.jpg?1305962310[/img] probably isnt anymore more cooling efficient (and just adds more weight) than this... [img]https://p.vitalmx.com/photos/users/64/photos/47587/s780_052111hangtownfri005.jpg?1305962139[/img]
so this...

probably isnt anymore more cooling efficient (and just adds more weight) than this...
As far as the difference between the two bikes shown, I don't think that the JGR bike is just an extended radiator tank ("Tank" is the radiator nomenclature). They are really innovative thinkers and possibly have incorporated a hidden water to oil, oil cooler into the tank head, such as the Laminova cooler I've shown (though I don't see any oil lines) Hey they're NASCAR guys, they know how to hide stuff.

tunedlength
Posts
2791
Joined
12/9/2006
Location
Ontario, CA, USA
6/2/2011 8:05pm
do you ever add anymore tank room to, say, the bottom of stock tanks?
No, I haven't. My understanding though, is more coolant capacity without more radiator fins, doesn't provide much benefit.
that was my next question. thanks.
When heat builds in the cooling system pressure increases. if the pressure exceeds the cap blow off value you will loose some fluid. this can happen several time in a moto.
Extra coolant capacity can keep the motor alive a bit longer.
slumpstone
Posts
399
Joined
9/22/2006
Location
Thomasville, GA, USA
6/3/2011 3:32pm
The radiators on the Suzuki City bike look like some of Brett at ICW's work. He does great work at a reasonable price with fast turn around.
mxdadx2
Posts
17
Joined
4/1/2008
Location
USA
6/3/2011 4:19pm
I believe Stewart's radiators are Mishamotos. They come welded and braced from the company.
6/3/2011 6:21pm
No they're definitely icw's. If you look very closely at the bottom you can even see the icw sticker. Its hard to see at the angle the picture is at, but it's there.
6/6/2011 10:02am
No they're definitely icw's. If you look very closely at the bottom you can even see the icw sticker. Its hard to see at the angle...
No they're definitely icw's. If you look very closely at the bottom you can even see the icw sticker. Its hard to see at the angle the picture is at, but it's there.
hes listed on mishimotos website as a team rider.
http://www.mishimoto.com/powersports-race.html
Skinnly
Posts
300
Joined
5/16/2011
Location
wfo, CA, USA
6/6/2011 12:57pm
Quality stuff. Nuff said.
TWicks
Posts
136
Joined
1/1/2010
Location
Boise, ID, USA
6/6/2011 3:36pm
Hey stillwelding, what's it cost to get a set of radiators done like that?
6/27/2011 2:48pm

TWMX: When compared to Supercross, outdoors is much harder on the bikes. The tracks are rougher, the races are longer, and the temperatures are much higher. We spotted these pressurized radiators on the Geico Honda bikes. If you look closely you can see the valve stem on the backside of the radiator. The team uses Nitrogen to pressurize the radiators. It helps with keeping the bike cooler by improving the efficiency of the cooling system.
TeamGreen
Posts
37840
Joined
11/25/2008
Location
Thru-out, CA, USA
6/27/2011 2:57pm
This thread is entirely too informative.

You have ALL been warned!

Post a reply to: Welded radiators for C4MX

The Latest