Posts
3
Joined
4/4/2025
Location
Aalborg, DK
Hi 🤗
Hope someone can help me.
I have a Gasgas MC450F from 2022 and I´m new to Gasgas.
My traction control worked fine until last week after a race.
Now it wont turn on.
I´ve tried to disconnect the battery to see if that reset TC, tried to hold TC and MAP down at the same time, with no luck. It doesn´t light up no matter what i do.
Is there a way to reset it or is there a fuse that needs to be changed?
Have any of you tried that?
Hope you can help me.
Kongen
KTM's wiring harness is tragically low quality. Trace the wires back to the ECU connector and test them with a digital multi-meter.
Also, those map switches die when they are pressure washed or exposed to excess moisture.
There's a small red connector behind the front number plate (I think it has three pins). That's the map switch, so start there.
If you have a buddy with the same generation KTM/GasGas/Husqvarna, try swapping map switches or plug yours into his bike to determine if it's the switch or the wiring.
Maybe the light burned out on the switch?
Post a reply to: Traction control doesn´t work anymore