Hey guys,
Hope you all had a great weekend! Just dropping by with some photos & info for any who may care to read!
Our MC500 build (HELFYRE) is complete & ready for it's new owner! Biting my nails a bit as there are just 6 days left to enter to win this monster.
I had the pleasure of filming the 👉 official reveal video inside Rekluse Motorsports here in Boise- as well as downtown with the alternate "HELMODE" body kit installed.
In this final week of the contest, I also have a ton of MX parts to give away from my rad Build Team members. Just cherries on top for those who are already entered to win HELFYRE.
This week, I have all of these parts to send your way:
1) The all-new Lectron Pro Series carburetor ($600+)
2) Stuck Nutz threadlocker
3) Two pairs of limited edition "HELFYRE" goggles from Onium Pro (only 10 made!)
4) 3DP Moto's 3D printed brake line guides
5) A complete Phoenix Handlebars cockpit setup - bars, grips, bar pad & grip wire
6) Dubya USA tire changing spoons & axle accessories
7) Motool's "Slacker" digital sag scale w/ Bluetooth
8) Dirt Tricks chain wear gauge
9) A custom engraved Rekluse clutch cover for your machine
10) A brand new, custom set of DeCal Works graphics
If you guys have any questions about the build, such as where to find "X" or "what color is that frame", just ask & I'd be happy to point you in the right direction.
This was a lot of fun (as always!) and I am stoked to see who wins.
Have a great evening & you can enter to win HELFYRE here if this sort of thing is up your alley!
-Charles // mXrevival
Ain't gonna lie.
Would love to have that beast in my shed.
Great looking build!
I’d love that too!
Huge thanks, Camp!
The Shop
$20 donation to get a chance at this thing??? Don't have to ask me twice.
Cool deal, right? 😍 I appreciate you.
Nice work Charles! When can we hear it ripping?
You will get to hear it rip after I win it.
I'll be taking a stab at winning it tonight. That thing is amazing! I wouldn't even ride it. Just put it in the living room. "No room for the couch babe, I need the bike in here!"
OMG! That thing is fire! Not only would I love to ride that in the dirt but imagine putting a snowbike kit on that thing!
Too much bike for me but GL. Hopefully a vital member wins it and we get to see more of it.
Holy mother of radness. I like it.
That's a damned cool bike.
I'd love to swing a leg over one of the BRC conversions back to back with my old KX...
If you can find a set, grab some Polisport frame protectors for that thing.
They are all red and they match the frame paint well. Don't forget to buy a handful of red zip-ties too.
I'm not sure what's more handsome, the bike or the builder
As always, well done Charles!!! Can't wait to take it home!
Thank you! I'll have more rip-date info after we award it to a winner. Then I can ask permission to shred! (Dirt Bike Magazine most likely)
THIS!!^^ Law of attraction hard at work, I love it!
THANK YOU FOR BEING A PART OF THIS!
Pit Row
😂🙌🙌
Huge thanks!
I see you're a details guy as well 🔥 I actually had not looked for guards yet and assumed I'd be stuck with black. Thanks for the lead on the red. Going to need at least a little protection for "the big day"
Another cool tip for the frame guard guys- duct tape the frame first. It will help stop damage from dirt & dust grinding between guard & frame. Always thought that was funny- the do exactly whet they are meant to stop from happening otherwise...
The KX would be a sweet side by side test for sure. Esp modern frame / susp. VS the OG's older tech.
😂
Maybe we'll cook hot dogs at the live stream again haha!
Appreciate you & your pops for your support, yet again
Yeah, the guards, especially on aluminum bikes, just grind the frame to bits. Taping stuff is nice attention to detail.
I use the pipe insulation PVC tape on my subframes and main frame where the airbox and skid-plate rubs.
It's 20 mil thickness and comes in a two inch wide roll. If you've ever used a Tubliss system, they just re-label the same PVC tape and mark up the price.
20 mil:
https://www.homedepot.com/p/Orbit-2-in-x-50-ft-20-Mil-Pipe-Wrap-Duct-Tape-53550/100179778
10 mil:
https://www.homedepot.com/p/Berry-Plastics-2-in-x-100-ft-711-PVC-Pipe-Wrap-Tape-in-Black-1365450/206796577
Here's the exact frame guard product in my photo above.
(It seems like they're out of stock and I had to go through my previous order invoice to find it... Maybe discontinued?).
https://www.rockymountainatvmc.com/parts/polisport-frame-protectors-p?s=1808122
You are the MAN, thank you for sharing with such detail & links. I'm going to try this stuff for sure.
DeCal Works may have these guards in stock too. Warehouse is loaded with Polisport. I need to get on that actually...
Have a killer day, dude
This dude not only builds insane, very detailed motorbike’s, but the guy is pleasant as hell. That is a tough combination to find. The Bike is stunning. Good Luck to the new owner !
That means a lot, thank you Brother!
Hope everybody killed it today, just dropping by with a few before and after photos of HELFYRE!
Just three days left!
Have a killer evening, taking the baby out to Disney on ice 😂
AMAZING!!!
GRACIAS!!!
Dropping one more "last call" post! Under 24 hours left to win this hog!
Have a great Sunday & I hope you take a shot at this one-off build 😍 Here's a build overview video too. Enjoy!
Thank you to all who help me / mXrevival complete & award successful builds.
-Charles // mXrevival
Mongo like....
Mongo wants....
Post a reply to: IT'S ALIVE! 2023 Gas Gas MC500 Two Stroke build - Something about a Big Bore w/ a magic button!