Posts: 226
Joined: 7/7/2015
Location: Utica, MI USA
I'm about ready for a revalve, rebuild, and possibly new springs too.. I was thinking of going with either Factory Connection or Race Tech. I am local to a few tuners (Tech Care, JP Speed) too.
Also - can anyone comment on their spring rates and weight? I'm on a 2014 YZ125, about 173lbs with gear.
Posts: 1034
Joined: 9/16/2016
Location: Katy, TX USA
MB109 wrote:
I'm about ready for a revalve, rebuild, and possibly new springs too.. I was thinking of going with either Factory Connection or Race Tech. I am local to a few tuners (Tech Care, JP Speed) too.
Also - can anyone comment on their spring rates and weight? I'm on a 2014 YZ125, about 173lbs with gear.
I tried to buy some springs from Race Tech last week and they were hell bent on selling me the opposite of what I wanted. They kept trying to sell me stock springs for 150 pound kids. I kept explaining to them that I'm a grown adult and have been drinking beer and eating BBQ for 30 years and dont weigh 150 anymore. They just igonred me and kept trying to push the stock springs.
I would no longer trust Race Tech. I think they are just out to make a sale no matter what.
Posts: 2
Joined: 7/5/2017
Location: Hammond, LA USA
Posts: 19305
Joined: 6/15/2010
Location: Bowie, MD USA
Posts: 523
Joined: 2/17/2017
Location: Ravenna, MI USA
Posts: 6678
Joined: 11/30/2013
Location: Portland/Los Angeles, CA USA
Posts: 19305
Joined: 6/15/2010
Location: Bowie, MD USA
Posts: 334
Joined: 7/13/2014
Location: Tulsa, OK USA
Posts: 226
Joined: 7/7/2015
Location: Utica, MI USA
@Rockinar - thanks for the info, think I'll steer clear.
Thank you to everyone else - going to dial up FC and Enzo tomorrow.
Posts: 89
Joined: 7/20/2016
Location: Grand Blanc, MI USA
