CR kickstarter won't come off the shaft?

Related:
Create New Tag

7/15/2017 2:53 PM

Trying to do the water pump seals on my 07 CR125 and to do so, I need to take the whole right side cover off. Thing is, I can't even get the kickstarter off! I mean it won't budge at all. In ones I've done in the past I'm usually able to wiggle it by hand and maybe tap on it with a hammer and it comes right off. Not so much with this one. Ive tried everything I can think of. Anyone know if I can just leave it on there and pull the kickstarter gear off along with the cover all together? Never done this before.

|

7/15/2017 2:54 PM

Photo

|

7/15/2017 3:24 PM

PB Blaster or WD or any type of penetrant. Let it soak in.

|

7/15/2017 3:51 PM

There must a bur on that spindle.

|

7/15/2017 3:59 PM
Edited Date/Time: 7/15/2017 4:01 PM

wwoberg wrote:

PB Blaster or WD or any type of penetrant. Let it soak in.

Soaked it with PB blaster and put some MAP gas heat on it. Still nothing.

|

7/15/2017 4:44 PM

|

7/15/2017 5:13 PM

|