off cambers?

xc200
Posts
49
Joined
12/28/2013
Location
Astoria, OR, USA
Edited Date/Time 1/24/2014 2:04pm
Maybe its my off-road side talking but why don't they mix it up and throw in some off camber turns into these sx track designs? I'm not talking a bunch of them but one here and there might make it interesting?
|
wreckitrandy
Posts
4216
Joined
8/16/2006
Location
Granite Falls, NC, USA
1/24/2014 1:22pm
Agreed! Stop being worried so much about 'flow'. Disrupt the 'flow' and slow the tracks down.
njracer46
Posts
713
Joined
3/20/2011
Location
USA
1/24/2014 1:26pm Edited Date/Time 1/24/2014 1:27pm
I have seen them work good and bad. They had one on a 90 degree corner and there was an inside and outside line.

Then there was a horrible one that ended up just having one big rut going through the middle of it, which lead to single file racing in that section. If they do it right it can be very good.

Both of these were in recent years
jhansen510
Posts
2405
Joined
2/10/2009
Location
GREENFIELD, MN, USA
1/24/2014 1:33pm
In my opinion they work best when they have an outside line that allows you to double out of the corner and an inside line where they go tight and have a take off where the guys that went outside and doubled are landing. In my opinion they need to have more different rhythms opposed to where everyone is doing the exact same rhythm the entire track!
mx6tim
Posts
22
Joined
4/23/2013
Location
Brookville, OH, USA
Fantasy
1/24/2014 1:36pm
Indy had one... didn't work out for DW15 in the heat race first lap.

The Shop

jhansen510
Posts
2405
Joined
2/10/2009
Location
GREENFIELD, MN, USA
1/24/2014 2:04pm
Yes I remember that. I do not recall that being the tracks fault. Cant remember the particulars.

Post a reply to: off cambers?

The Latest