LED lights

Related:
Create New Tag

10/10/2018 2:26 PM
Edited Date/Time: 10/10/2018 2:28 PM

I'm planning to ride in the dark and need some advice
How heavy of a lamp can I put on my helmet?
How much watt does the fuel injection take (Honda crf250, 2011)

|

10/10/2018 2:36 PM

if I were you I'd look into Nite Rider helmet lights, they're really bright and have a pretty good battery life.

|

10/10/2018 3:23 PM

https://www.oxbowgear.com/

Check them out, I have one of their helmet lights. I ride a KTM150XC, which doesn't have any lighting. I can see very well with this light. It's very lightweight, no heavier than a GoPro. Hope this helps!

|

10/10/2018 3:24 PM

jankymike wrote:

if I were you I'd look into Nite Rider helmet lights, they're really bright and have a pretty good battery life.

I have one of those also, it works really good too. Not as many lumens though.

|

10/10/2018 4:16 PM

This is where I bought my light. Made my own bracket. TL500F

https://tigerlights.com/search.html?q=tl500

The U-bracket came with the light, I welded it to the small bracket that is in the picture. The larger bracket mounts to the top bolt at the # plate and the 2 fender bolts



Photo



Photo
Photo

|

Germany 1975 250 CZ Centerport, laydown shocks, mikuni with reed valve, Marzocchi forks with me as the motopilot

10/10/2018 4:20 PM

Motominded.com

|

10/10/2018 4:32 PM

I recently purchased a Baja Designs Squadron headlight for my 2019 YZ450F.....raced a night race a few weeks ago at Glen Helen and i had one of the brightest lights in the class and it wasn't overkill. I'll be using it to ride sweep at the 24hr GP this weekend in Glen Helen

|

twist wrist and go...

brad@palmspringsmotorsports.com

10/10/2018 4:48 PM

Tim507 wrote:

This is where I bought my light. Made my own bracket. TL500F

https://tigerlights.com/search.html?q=tl500

The U-bracket came ...more

Are you happy with the output? Pattern and amount of light? What kind of riding are you doing?

I thought a flood pattern might be a bit short/wide and the lumens are typically over-stated on most of the Chinese made LEDs.

Great looking bracket, if you ask me!

|

KTM250SX YZ125 YZ85 PW80 ZX6 FZX700

10/10/2018 4:51 PM

4000 lumen, desert trail riding in Eastern Oregon - China Hat and other areas. Worked great in my opinion and the cost is reasonable. Bracket cost $50.00 and I knew the fabricator.

|

Germany 1975 250 CZ Centerport, laydown shocks, mikuni with reed valve, Marzocchi forks with me as the motopilot

10/10/2018 10:56 PM

Tim507 wrote:

4000 lumen, desert trail riding in Eastern Oregon - China Hat and other areas. Worked great in my opinion and the cost is ...more

Looks great, I put a 80W lamp on mine but when I turned it on the motorcycle died so my generator don't produce that much

|

10/11/2018 11:22 AM

Had to have my stator rewound (its a 350 XCF) , there is a place in Southern California....http://www.rickystator.com/page/rewinds

|

Germany 1975 250 CZ Centerport, laydown shocks, mikuni with reed valve, Marzocchi forks with me as the motopilot

10/11/2018 1:23 PM

Tim507 wrote:

4000 lumen, desert trail riding in Eastern Oregon - China Hat and other areas. Worked great in my opinion and the cost is ...more

Merida wrote:

Looks great, I put a 80W lamp on mine but when I turned it on the motorcycle died so my generator don't produce that much

rickystator is a good one.
There's also Baja Designs and Trail Tech, that I'm aware of.

|

KTM250SX YZ125 YZ85 PW80 ZX6 FZX700

10/11/2018 1:34 PM

bradmx421 wrote:

I recently purchased a Baja Designs Squadron headlight for my 2019 YZ450F.....raced a night race a few weeks ago at Glen Helen ...more

Damn near blinded me in the pits

|

"A link is only as long as your longest strong chain"

10/12/2018 7:27 AM

bradmx421 wrote:

I recently purchased a Baja Designs Squadron headlight for my 2019 YZ450F.....raced a night race a few weeks ago at Glen Helen ...more

Stuntman949 wrote:

Damn near blinded me in the pits

They seams really hard to find in Sweden unfortunately sad seams heavy to have on the helmet

|

10/12/2018 11:45 AM

|